The reasons why broadband cannot access the Internet are: 1. After the pigtail head is pulled out, it is contaminated and stained with dust; 2. The outdoor optical cable is broken; 3. The network cable from the optical modem to the router is connected incorrectly; 4. , the connected network cable is broken; 5. The network cable from the router to the computer is connected incorrectly, etc.
The key equipment for broadband Internet access includes: optical fiber, optical modem, wireless router, network card, including wired network card and wireless network card, network cable; these five types It is essential and indispensable. As long as one of the links fails, it will affect the normal use of broadband.
Fiber Optic Fault(Recommended Learning:PHP Video Tutorial)
Fault Phenomenon: Optical Cat LOS Indicator Turns Red
Cause of failure 1: After the pigtail head was pulled out, it was contaminated and stained with dust.
Solution: Use alcohol to clean the pigtail head and fiber port, and plug them back in.
Fault reason 2: The outdoor optical cable is broken
Solution: Please call Broadband Service provider customer service reports repairs.
Network cable failure
Fault phenomenon: The optical modem indicator light is normal, but the Internet cannot access the Internet
Fault location 1: There is a problem with the network cable from the optical modem to the router
Fault possibility 1: The network cable from the optical modem to the router is connected incorrectly.
Solution: Generally, a multi-port optical modem network cable is connected from LAN1 to the WAN port of the router.
Generally, the LAN2 of multi-port optical modem is usually connected to the IPTV set-top box.
(Some local operators may have different ones)
Fault possibility 2: The connected network cable is broken
Solution: Replace the network cable
Fault location 2: Router to computer
Fault possibility 1: The network cable from the router to the computer is wrongly connected
Solution: Connect the computer network card from any LAN port of the router.
Fault possibility 2: The connected network cable is broken
Solution: Replace the network cable
The wireless network cannot be used normally
Fault phenomenon 1: The computer can access the Internet normally, but the wireless terminal cannot access the Internet
Fault possibility: Wireless SSID connection error
Solution: Connect the correct wireless SSID and enter the correct password
Fault Phenomenon 2: The wireless signal is good and sometimes lags,
Fault Possibility 1: The distance is too far
Solution: Add a wireless repeater to expand the wireless signal
Fault possibility 2: There is interference in the wireless signal band
Solution: Change the wireless SSID channel to 1, 6, or 11. These three channels have strong interference resistance.
The wireless network can be used normally, but the wired network cannot access the Internet
Possibility of failure 1 The IP address of the network card is incorrect, and the DNS is incorrect
Solution: Restart Set the network card IP address attribute to automatically obtain the IP address
Fault possibility 2 The network card is disabled
Solution: Double-click the network card to enable it
Fault possibility 3 Network card failure
Fault phenomenon: If the network card is not disabled, when ping 127.0.0.1 is used during operation, the target address is displayed as unreachable.
Solution: Replace the network card
Neither wired network nor wireless network can access the Internet normally through the router.
Fault phenomenon: The computer is connected to the optical modem, and the dial-up Internet access pops up error 691
Fault possibility 1: Broadband account expires
Solution: Please go to Broadband Renewal at the operator's office.
Fault phenomenon: The computer is directly connected to the optical modem and can access the Internet normally through dial-up, but cannot access the Internet through the router.
Fault possibility 2: The PPPoE chip of the router is damaged,
Solution: Replace the router
For more PHP-related technical articles, please visitPHP Graphic Tutorialcolumn for learning!
The above is the detailed content of What is the reason why the broadband cannot access the Internet?. For more information, please follow other related articles on the PHP Chinese website!