The reason why the laptop becomes hot is due to insufficient heat dissipation caused by excessive dust on the computer host. It is recommended that the computer be cleaned regularly. After turning on "Space", the temperature rises and it automatically shuts down. This is because a large program is running in the background. At this time, the computer consumes a lot of power and generates a lot of heat. It is recommended to check for program problems.
Most reasons and solutions for laptops getting hot are as follows:
1. There is too much dust in the laptop. It is recommended to disassemble it and clean the dust to prevent the CPU temperature from being too high due to the inability to dissipate heat;
2. Check whether the fan is damaged. If it is damaged, replace it with a new one in time;
3. The silicone grease on the CPU has been completely dried. It is recommended to re-apply silicone grease to assist CPU heat dissipation;
4. Install the driver software. The driver is very important. The driver can adjust the hardware operating status according to the usage, thereby reducing power consumption and heat generation.
The above methods need to be completed under the guidance of professionals, use with caution!
Daily maintenance of laptop computers:
1. Liquid crystal display screen (LCD Panel)
1. Do not cover the LCD screen with force or place any Foreign matter is between the keyboard and the display screen to avoid damage to the internal components due to heavy pressure on the upper cover glass; Turning off the screen power can not only save power but also extend the life of the screen;
3. Do not touch the screen surface with fingernails and sharp objects (hard objects) to avoid scratching;
4 . The surface of the LCD screen will absorb dust due to static electricity. It is recommended to purchase a special wiper for the LCD screen to clean your screen. Do not wipe it off with your fingers to avoid leaving fingerprints, and please wipe it gently;
5 , Do not use chemical cleaners to wipe the screen.
2. Battery
1. When there is no external power supply, if the card in the PCMCIA slot is temporarily unavailable for the current working conditions, it is recommended to remove the card first. To extend the battery life;
2. Room temperature (20-30 degrees) is the most suitable working temperature for the battery. An operating environment with too high or too low temperature will reduce the battery life;
3. When using a laptop in an environment that provides stable power, it is incorrect to remove the battery to extend battery life. As far as ASUS laptops are concerned, when the battery is fully charged, the charging circuit in the battery will automatically shut down, so overcharging will not occur;
4. It is recommended to perform battery power calibration once every three months on average. Action;
5. When using the power adapter (AC Adapter), refer to the international voltage instructions.
3. Keyboard
1. When dust accumulates, you can use a small brush to clean the gaps, or use a high-pressure jet can commonly used to clean camera lenses to blow out the dust, or use Use a handheld vacuum cleaner to remove dust and debris on the keyboard;
2. To clean the surface, apply a little detergent on a soft cloth and gently wipe the keyboard surface with the computer turned off.
4. Hard Disk
1. Try to use it in a stable condition and avoid operating the computer in a place that is prone to shaking;
2. The process of turning on and off the computer is The hard drive is at its most vulnerable. At this time, the hard disk bearing has not rotated yet stably. If vibration occurs, it will easily cause a bad track. Therefore, it is recommended to wait for about ten seconds after shutting down the laptop before moving the laptop;
3. Perform disk reorganization and scanning on average once a month to improve disk access efficiency.
5. Floppy Drive(Floppy)
1. Avoid using floppy disks with poor appearance or moldy appearance;
2. Purchase floppy drive cleaning tablets and clean the read and write heads regularly. Optical drive (CD-ROM);
3. Use a CD cleaning sheet to clean the laser reading head regularly;
4. Please use both hands to put the CD into the CD-ROM drive. Hold the CD tray with one hand and firmly secure the CD with the other hand to prevent the CD tray from deforming.
6. Touchpad
1. Please keep your hands clean when using the touchpad to avoid the cursor running around;
2.No If you are careful to dirty the surface, you can wet a corner of the dry cloth and gently wipe the surface of the touch panel. Do not use rough cloth or other items to wipe the surface;
3. The touch panel is an inductive precision electronic component. Do not use sharp objects to write on the touch panel, and do not use it with heavy pressure to avoid damage.
7. Thermal Dissipation
1. Generally speaking, notebook computer manufacturers will use fans, heat pipes, large heat sinks, heat dissipation holes, etc. Reduce the high temperature generated during use;
2. In order to save power and avoid noise, the fan of the laptop does not run all the time. The fan will only start when the CPU reaches a certain temperature;
3. Placing the laptop on soft objects, such as beds and sofas, may block the cooling holes and affect the cooling effect, thereby reducing operating performance or even crashing.
The above is the detailed content of Why is my laptop so hot?. For more information, please follow other related articles on the PHP Chinese website!