Home>Article> data transfer rate unit

data transfer rate unit

(*-*)浩
(*-*)浩 Original
2019-06-03 13:01:22 42679browse

Data Transfer Rate is one of the important technical indicators describing the data transmission system. The data transfer rate is numerically equal to the number of bits that make up the data code transmitted per second.

data transfer rate unit

Commonly used data transmission rate units are: Kbps, Mbps, Gbps and Tb/s. Currently, the fastest theoretical transmission rate of Ethernet LAN (also The so-called "bandwidth") is 10Gbit/s.

Among them:

1Kbps=1000 bps

1Mbps= 1000*1000bps

1Gbps=1000*1000* 1000bps

1Tbps= 1000*1000*1000*1000bps

Recommended course:PHP Tutorial.

Data transmission rate calculation formula:

R=(1/T)*log₂N (bps)

where: T is a digital pulse signal The width (full-width code) or repetition period (return-to-zero code), the unit is seconds; a digital pulse is also called a symbol, and N is the number of effective discrete values taken by a symbol, also called the number of modulation levels , N generally takes an integer power value of 2. If a symbol can take two discrete values: 0 and 1, then the symbol can only carry one bit of binary information; if a symbol can take four discrete values: 00, 01, 10, and 11, then the symbol can Can carry two bits of binary information. By analogy, if a symbol can take on N discrete values, then the symbol can carry log₂N bits of binary information. When N=2, the formula of the data transmission rate can be simplified as: R=1/T, which means that the data transmission rate is equal to the repetition frequency of the symbol pulse. From this, another technical indicator can be derived - the signal transmission rate, also known as the symbol rate, modulation rate or baud rate (the unit is baud, recorded as Baud). The signal transmission rate represents the number of symbols transmitted through the channel per unit time, which is the transmission rate of the signal after modulation. If the amount of information contained in each symbol is 1 bit, the baud rate is equal to the bit rate.

Calculation formula: B=1/T (Baud), where T is the width of the signal symbol, in seconds.

From the above two formulas we can get: R=B log₂N (bit/s), or B=R/ log₂N (Baud)

In the computer In , the meaning of a symbol is high and low levels, representing logic "1" and logic "0" respectively, so the amount of information contained in each symbol is exactly 1 bit, so in computer communications, it is often called "bit rate" is the "baud rate", that is:

1 baud (B) = 1 bit (bit) = 1 bit/second (1bit/s)

For example:

The fastest transmission rate of a teletype machine is 10 characters/second. Each character contains 11 binary bits. The data transmission rate is: 11 bits/character × 10 characters/second = 110 Bits/second = 110 baud.

Another way to express the data transmission rate is "bit time" (Td), which refers to the time required to transmit a binary bit, expressed as Td. The computer formula is as follows.

Td = 1/Baud rate = 1/B

For example:

B=110bit/s, then Td = 1/110 ≈ 0.0091 s (9.1ms)

The above is the detailed content of data transfer rate unit. For more information, please follow other related articles on the PHP Chinese website!

Statement:
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
Previous article:what is u3d Next article:what is u3d