Causes and solutions that cause the server to become unresponsive: 1. Wrong connection of the line or poor contact of the network cable interface. It is recommended to change a network cable; 2. Problems with the optical modem, it is recommended to replace the spare optical modem; 3. Problems with the router itself , it is recommended to reset the router, or replace the router with a new one and dial up again to connect to the Internet; 4. Due to problems with the network operator, you need to check whether the line is faulty.
#Why is the server not responding? When we use the server, sometimes there will be an unresponsive prompt. So what's going on? In fact, there are many reasons why the server is unresponsive.
1. The line is connected incorrectly or the network cable interface is in poor contact. According to the type of home broadband line, confirm that the line is connected correctly. If the line connection is normal but the WAN port indicator light does not light up, check whether the network cable interface is in contact and try using another network cable. Make sure that the computer is directly connected to the broadband and can access the Internet normally to eliminate problems with the broadband line.
2. Regarding the cat problem, if there is a spare cat, it is recommended to replace the spare cat.
3. Abnormal disconnection, such as suddenly powering off the MODEM or router during normal Internet access, directly unplugging the WAN port network cable of the router, etc., is an abnormal disconnection. From the client's point of view, it is disconnected, but the server does not release the connection at this time, causing the router to be unable to dial successfully immediately.
4. There is a problem with the router itself. Restart the router. If it does not work, it is recommended to reset the router (restore factory settings) and dial-up to connect to the Internet again. If there is a backup router, it is recommended to replace the router and dial-up to connect to the Internet again.
5. The problem is caused by the network operator. Call the network operator and ask the other party to check whether the line is faulty, causing the server to become unresponsive.
The above is the detailed content of Why is the server not responding?. For more information, please follow other related articles on the PHP Chinese website!