1. Turn the machine over and you can see the keyboard fixing screws (the keyboard fixing screws of most machines are They are all symbols of the keyboard and are easy to identify) If it is a combination of screws and keyboard buckles, in addition to removing the screws, you also need to push the keyboard buckle down or online. If the buckle is broken, just tighten the keyboard fixing screws.
2. Plastic type key puller. When using it, find the appropriate entry point for the keyboard cap and press it. Shake it left and right twice. Then lift the key cap easily and pull it off. This type of key extraction The disadvantage of the device is that the buckle is too small and short, making it inconvenient to operate. The advantage is that it is the most popular on the market and can be bought everywhere.
3. Yes. Hold the top of the button with your hand, and use a little force to pull it in your direction (because some buttons are arranged in different orders, some need to pull it horizontally), and the button will be removed.
4. First remove a key. Hold the top of the button with your hand, and use a little force to pull it in your direction (because some buttons are arranged in different orders, some need to pull it horizontally), and the button will be removed.
5. How to open the notebook's small keyboard. Method 1: Right-click a blank space on the taskbar and select Show touch keyboard button. Then you can see the soft keyboard icon in the lower right corner, click it to bring up the soft keyboard. Method 2: Left-click the start menu, select the settings icon, and enter the page.
1. First remove the relatively long shift key. First, grab the upper edge with your hands and pull it upward. The keyboard cap will come off, as follows As shown in the figure. You can see that the keycap and base are connected by a steel wire, as shown in the picture below.
2. The following is: Step1: Shut down and power off. Before any disassembly, first turn off the power, and then unplug the battery and power adapter. Step2: Disassemble the keyboard. Generally speaking, the keyboard can be easily disassembled. Find the cable connecting the keyboard and the motherboard and pull it out with little force.
3. Make sure there is no damage. The X-shaped bracket is connected under the keycap. First, remove the X-shaped bracket under the keycap. Use your index finger to press one side of the bracket in the picture below, and slowly apply force. The other side of the bracket will be pushed out from the groove marked with a red circle. The other bracket is simple, just pull it up and it comes out.
4. First, you need to unscrew all the screws on the back of the notebook (note that this is a stupid method. If you know which screws are connected to the keyboard, just unscrew them). Secondly, on the keyboard There is usually a card slot. You can disassemble the keyboard by removing the card slot. Pay attention to the wiring of the keyboard.
1. Use a small screwdriver to pry off the keycaps of the keyboard one by one. Use a screwdriver to unscrew the screws on the back of the keyboard. Remove the upper cover from the front of the keyboard. Remove the keyboard circuit board. Remove all screws from the circuit board. Remove the circuit board and scrub it clean.
2. Plastic type key puller. When using it, find the appropriate entry point for the keyboard cap and press it. Shake it left and right twice. Then lift the key cap easily and pull it off. This type of key extraction The disadvantage of the device is that the buckle is too small and short, making it inconvenient to operate. The advantage is that it is the most popular on the market and can be bought everywhere.
3. When installing, first fasten the wire to the space bar, then clamp both ends on the keyboard, align it with the convex groove of the space bar, press it and install it.
4. You can pull it off. Just insert your fingernail into the gap on the keycap, and then apply gentle force in the opposite direction to successfully pull it off. Let’s remove one key first.
1. When disassembling, first remove the strip above the keyboard. This kind of pressure strip usually has fixed screws on the back of the machine. Then we can see the screws that fix the keyboard. Then we can directly unscrew it carefully and disassemble it.
2. How to disassemble the laptop keyboard: How to disassemble the snap-on keyboard: First unscrew the fixing screw on the back, paying special attention to the position of the snap-on keyboard. Then use a hard object to pry the buckle open, being careful not to use excessive force. Then take off the keyboard and clean it directly. This is relatively simple.
3. Remove the relatively long shift key first. Hold the upper edge with your hands and pull it upward. The keyboard cap will come off, as shown in the picture below. You can see that the keycap and base are connected by a steel wire, as shown in the picture below.
4. Yes. Hold the top of the button with your hand, and use a little force to pull it in your direction (because some buttons are arranged in different orders, some need to pull it horizontally), and the button will be removed.
5. Make sure there is no damage. The X-shaped bracket is connected under the keycap. First, remove the X-shaped bracket under the keycap. Use your index finger to press one side of the bracket in the picture below, and slowly apply force. The other side of the bracket will be pushed out from the groove marked with a red circle. The other bracket is simple, just pull it up and it comes out.
6. First, remove the battery of the laptop, and then remove the back cover of the laptop. After removing the back cover, remove the screws that fix the keyboard.
The above is the detailed content of Laptop keyboard single key disassembly. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
