How to set up the hard disk to start the computer but it doesn't respond?

php editor Banana will give you an answer on how to solve the problem of the computer not responding after setting up the hard disk to start. When we want to start the computer from the hard disk, the problem that the computer does not respond may be caused by many reasons. This may be due to incorrect BIOS settings, hardware failure, or driver issues. Before solving this problem, we need to gradually investigate the possible causes and take corresponding solutions to ensure that the computer can boot from the hard drive correctly. Next, we will provide you with some common solutions to help you solve this problem.

Therefore, when there is a problem with the computer, first try to restart it. If the problem persists, consider reinstalling the system. Restarting is a simple and convenient solution.

Regarding reinstalling the system, the currently popular methods are mainly one-click reinstallation and USB disk reinstallation. The former is very simple. You only need to use a one-click installation tool (such as GeekDog Installation Master) and follow the guided operation to complete. The USB flash drive reinstallation requires writing the system image file to the USB flash drive first, and then booting through the USB flash drive into the installation interface for operation. However, in comparison, one-click reinstallation is more convenient and suitable for users without technical experience.

As for the latter, the more difficult step should be the USB boot settings.

This issue will help you understand how to set up USB disk boot for different brands and types of computers!

Note: To set up USB boot, the most important thing is to know how to enter the setting interface and select the priority of the boot device.

1. To enter the setting interface, you need to press the correct startup shortcut key

2. To give priority to booting the device, select the USB disk

Then, let’s take a look at these three methods~

It is important to check the corresponding startup hotkey according to the computer brand and type. You can refer to the startup hotkey list below to find the hotkey that suits you. It should be noted that the startup hotkey of Apple notebook is "option".

2. Restart the computer and press the startup hotkey occasionally when booting. For example, press F8 as soon as the Asus notebook is turned on, and press it several times until you enter the boot device selection page.

3. Please select boot device. Our computers generally boot from the hard disk by default, so if you reinstall the system from a USB flash drive, you must set the computer to boot from the USB flash drive first.

The one starting with sata is usually the hard disk option, and the one starting with usb or showing the USB disk name is usually the USB disk option.

4. The main meaning of the comments below is to select options through the up and down arrow keys, and press the Enter key to confirm after selecting.

5. Then select the USB drive and press Enter, then boot from the USB drive.

1. Press the startup hotkey according to the prompts on the startup page. When the computer logo appears on the startup screen, you can usually see the corresponding startup hotkey prompts with a few lines of English text at the bottom of the page.

2. For example, some computers have Press F12 to display Boot Menu (press F12 to display the boot menu). When you see this prompt, immediately press F12 to enter the boot device selection page, which is also the choice. Just press Enter for the USB disk option.

The last method is to enter the bios to set up the USB disk to boot. Generally, the English about Enter Setup is to enter the bios.

1. For example, the bottom of the startup screen prompts Press F2 to run setup, which means pressing F2 to enter the bios setup program.

2. After entering bios, select "boot", some are "startup", as shown in the figure below.

3. "Primary Root Sequence" (main startup sequence).

4. Now to set the first boot to the USB disk, you need to change the order through the " "/"-" key.

5. As shown in the figure below, set the usb key (referring to the USB flash drive) as the first one. Some computers have USB HDD or Removable Device, which refers to the USB flash drive.

6. Finally, switch to "exit" (exit), save the settings just now and exit.

7. The next time you restart your computer, it will start from the USB disk first.

If you reinstall the system and do not know how to set up a USB drive to start, you can refer to the tutorial above. The methods for setting up a USB drive to start are similar for different brands of computers. I hope it will be helpful to you!

The above is the detailed content of How to set up the hard disk to start the computer but it doesn't respond?. For more information, please follow other related articles on the PHP Chinese website!