php editor Xinyi will answer for you. The setting method for automatically entering the U disk boot item when the ASUS computer is turned on is as follows: First, press the F2 or DEL key when turning on the computer to enter the BIOS setting interface, and then find "Boot" or "Startup". " option, after entering, find the "Boot Option Priorities" or "Boot Option Priorities" option, find "Boot Option #1" or "Boot Option 1", select the U disk as the first boot item, save the settings and restart the computer That’s it. After this setting, the computer will automatically boot from the USB flash drive every time it is turned on.
1. First, long press f2 to enter the bios of the ASUS laptop. After entering the bios, switch to the boot tab
2. In the boot tab window, find boot option #1 and Press Enter to open it
3. Select the U disk, which means that the U disk is set as the first startup item. Every time you turn on the computer, the U disk will be directly selected first.
Method 2
1. Press and hold the ESC key and directly select USB boot in the pop-up window.
Only when there is a problem with the motherboard will the system boot into the BIOS. 1. First rule out the problem of not resetting the keyboard keys. The corresponding keys on different computers are different, usually the "Delete" and "Del" keys. If so just reset these keys. 2. If there is no floppy drive but the floppy drive is enabled, the floppy drive can be disabled. Press DEL to enter the BIOS after booting, select: STANDARD CMOS FEATURES DRIVE A: Set to None DRIVE B: Set to None Press F10 to save, enter "Y" and press Enter. 3. There is a problem with the memory or the CPU frequency has been changed. Just replace the memory and restore the BIOS default values. 4. Originally, two hard drives were installed and set to dual hard drives in the BIOS. Later, when one of them was removed, but the BIOS settings were forgotten to be changed back, this problem would also occur. Just restore the BIOS defaults. 5. If the above settings are ineffective, it may be that the COMS battery is out of power. Turn on the host, remove the button-type COMS battery, and replace it with a new battery. 6. How to restore BIOS default values: Turn on the computer or restart the computer and hold down the DEL key to enter the BIOS; Find Load Fail-Safe Defaults, press the arrow keys to select it and press Enter. When prompted to confirm, press Y and press Enter. Finally, select Save&exit step (save settings), you can also press F10 directly, press Y and enter to restart automatically, and the settings will take effect.
1. It may be because the USB interface is still powered after the motherboard is powered off. If you need to turn off the light after shutting down, you can perform the following operations in the BIOS interface:
1. After turning on the computer Click the F2 key or the DEL key to enter the BIOS interface;
2. Click the F7 key to enter the Advanced Mode interface;
3. Set APM--ERP support to on (S4 S5) , after the setting is completed, click the F10 key to save and exit the BIOS. The light will not light up after shutting down.
2. Not all ASUS motherboards have indicator switches. If you need to turn off the indicator light simultaneously after shutting down, it is recommended to unplug the power supply of the entire machine after shutting down.
1. First turn on the computer, click the DEL key to enter the BIOS interface, and set the Advance option - APM option - Erp option to "Disabled";
2. Set the Power on By RTC option is "Enabled";
3. Set the time you need for the machine to automatically turn on (RTC Alarm Date is set to "0", it is every day);
4. Save the settings;
5. Finally, enter the BIOS to confirm the time setting, shut down and enter the system, and then the ASUS motherboard settings will be automatically turned on.
It automatically enters the motherboard BIOS when the computer is turned on. There should be a problem with the motherboard BIOS settings. When designing some motherboard BIOS, in order to be more user-friendly, they include incorrect BIOS settings. It will automatically enter the BIOS. If this is the reason, replacing the battery will be invalid. You can restore the BIOS default settings according to your motherboard manual. Generally, enter the BIOS and select load fall--safe defaults or load optmized defaults, save and exit. However, the problem you are worried about that the screen will be black for about 30 seconds every time you turn on the computer may also be caused by incorrect BIOS settings. For example, the floppy drive is set to a 3.5-inch disk in the BIOS. If there is no floppy drive connected to your computer, then It will take a long period of testing.
1. Turn on the computer and click the DEL key to enter the BIOS interface. In the Advance option - APM option - the Erp option is set to "Disabled";
2. Set the Power on By RTC option to " Enabled";
3. Set the time you need for the machine to automatically turn on (RTC Alarm Date is set to "0", it is every day);
4. Save the settings;
5. Enter the BIOS to confirm that the time is set, then shut down and enter the system.
The method to set the ASUS motherboard to automatically boot after a power outage is as follows:
1. Click the Delete key on the keyboard when the computer is just turned on to enter the BIOS motherboard settings.
2. In the BIOS motherboard settings, select the Power option.
3. Select APM Configuration in the Power option.
4. Select Power On By RTC Alarm in APM Configuration.
5. Select Enabled in Power On By RTC Alarm.
6. Set RTC Alarm Date (Days), that is, which day of the 31 days in a month, every day is fine.
7. Set System time, which is the specific time for automatic startup when you turn on the computer.
8. After the settings are completed, press F10 to save the settings and exit BIOS setup.
It should be noted that different models of ASUS motherboards may have different setting methods, so it is recommended to refer to the ASUS motherboard user manual or online tutorial for settings. In addition, automatically turning on the computer after a power outage may affect the security and stability of the computer, so it is recommended to use it with caution.
The above is the detailed content of Asus automatically enters the USB disk startup item when it boots up?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
