How to launch the BIOS setup interface on MSI motherboard?

How to enter bios on MSI motherboard?

The method to enter the BIOS from MSI is as follows:

1. When setting up, you first need to insert the U disk into the interface of the host and restart the computer.

2. When the MSI motherboard logo appears on the computer, press the del key to open the settings page.

3. On the BIOS settings page, first click the language bar in the upper right corner to set it to Chinese, and then use the mouse to click settings. Then use the up and down keys to move the cursor to the startup option and click Enter.

4. After opening the startup configuration page, position the cursor at the startup option priority. At this time, the hard disk is displayed as the first startup item, and click Enter.

5. The hard disk U disk is included in the startup project table. At this time, you only need to select the U disk option with the uefi prefix, and then confirm. You will see changes on the right side, and finally press f10 again. Click OK to save and exit to set the MSI motherboard to boot from the USB flash drive.

How to enter BIOS on MSI motherboard?

Enter bios settings for msi motherboard

1. When setting, you first need to insert the U disk into the interface of the host and restart the computer.

2. When the MSI motherboard logo appears on the computer, press the del key to open the settings page.

3. On the BIOS settings page, first click the language bar in the upper right corner to set it to Chinese, and then use the mouse to click settings. Then use the up and down keys to move the cursor to the startup option and click Enter.

4. After opening the startup configuration page, position the cursor at the startup option priority. At this time, the hard disk is displayed as the first startup item, and click Enter.

5. The hard disk U disk is included in the startup project table. At this time, you only need to select the U disk option with the uefi prefix, and then confirm. You will see changes on the right side, and finally press f10 again. Click OK to save and exit to set the MSI motherboard to boot from the USB flash drive.

How to set up bios network card startup on MSI motherboard?

Hello, 1. Enter the BIOS setting interface. Press the DEL key or F2 key when booting to enter the BIOS setup interface.

2. Find the "Boot" tab and select "Boot Configuration".

3. Find the "Network Boot" option and set it to "Enabled".

4. Find the "Boot Option Priorities" option and set "Network Boot" as the first startup option.

5. Save the settings, exit the BIOS interface, and then restart the computer.

6. If you need to use PXE network boot, you also need to configure the TFTP service and image file in the DHCP server.

7. Make sure the computer is connected to the network properly, and it will automatically start from the network when booting.

How to enable MSI motherboard BIOS secure boot?

1.

Take Huawei mate book x and windows10 as an example.

Take Z390 as an example, restart and press DEL to enter the BIOS, press F7 to enter advanced mode, click the option to enter Settings, and then enter Trusted Computing.

2.

There is Security Device Support, change it to Allow (Enable), select PTT as the TPM device, and press F10 to save and restart after the settings are completed.

3.

Taking B550M as an example, restart and press DEL to enter the BIOS and select SETTINGS on the left to enter the setting interface. Also enter Trusted Computing in the security option.

4.

AMD fTPM switch, change it to AMD CPU fTPM, and change the Security Device Support above to Enable. Press F10 to save and restart.

How to enter bios with fast boot enabled on MSI motherboard?

1. Generally speaking, when the computer is turned on, there will be a corresponding shortcut prompt when the monitor stops at the bottom of the logo. The MSI shortcut key to enter Bios is the "Del" key.

2. During the startup process, press the startup hotkey F11 to quickly select U disk startup or hard disk startup, and then enter the boot menu in Bios.

3. If you need to enter Advanced mode can be entered by quickly pressing the Del key after turning on the computer.

How to enter bios on MSI motherboard?

1. When setting up, you first need to insert the U disk into the interface of the host and restart the computer.

2. When the MSI motherboard logo appears on the computer, press the del key to open the settings page.

3. On the BIOS settings page, first click the language bar in the upper right corner to set it to Chinese, and then use the mouse to click settings. Then use the up and down keys to move the cursor to the startup option and click Enter.

4. After opening the startup configuration page, position the cursor at the startup option priority. At this time, the hard disk is displayed as the first startup item, and click Enter.

5. The hard disk U disk is included in the startup project table. At this time, you only need to select the U disk option with the uefi prefix, and then confirm. You will see changes on the right side, and finally press f10 again. Click OK to save and exit to set the MSI motherboard to boot from the USB flash drive.

Which key to press to enter bios settings on MSI motherboard?

F11.

Tutorial on entering BIOS settings for MSI desktop motherboards.

The specific method is as follows:

1. Restart the computer first.

2. Press the del key continuously after the MSI logo.

3. When the "SETTINGS" page appears, it means you have entered the BIOS system.

4. If you just want to set up the U disk boot, just keep clicking the F11 key when booting the computer. The boot selection interface will appear. Just select the U disk name or USB option.

The above is the detailed content of How to launch the BIOS setup interface on MSI motherboard?. For more information, please follow other related articles on the PHP Chinese website!