The ASUS motherboard cannot start the operating system and remains stuck in the BIOS interface?

Can't enter the ASUS motherboard and the system always stops in bios?

1) First try to press F10 to save, click YES, restart the computer and it will usually be OK. If the problem persists after doing this, the following reasons may be the reason

(2) This is an error in the motherboard BIOS , that is, setting errors, such as overclocking, sudden power outage, the motherboard battery is out of power, and some unknown reasons cause the motherboard BIOS to error, and the hardware parameters cannot be read, and the self-test cannot be passed. Generally, when encountering such a phenomenon, it is Enter the BIOS and restore the motherboard to factory values, or remove the motherboard battery and restore it to factory values. Another reason is that the motherboard battery is out of power. Just replace the motherboard button battery. The specific operation method is as follows

(1 ) Step 1: Restore the motherboard BIOS to factory values ​​

After booting, press DEL to enter the motherboard BIOS, then use the arrow keys to select "EXIT" at the top, and then select: Load setup Defaults "Load Enter the default value", then click "YES", and then press F10 to save. After restarting the computer, press DEL to enter the BIOS, set the time and first startup item, F10 to save, and generally you can enter the system.

Asus Heavy Gunner can't boot into the system?

Step 1. First check whether the power supply is not plugged in properly or there is a problem with the plug. If it is a battery, plug it in and try again;

Step 2. If it can be turned on, then It means that the external power supply is damaged. If it does not work, it means that there may be a hardware failure inside the laptop or the laptop startup button is malfunctioning. In this case, it is recommended to take it for maintenance;

Step 3. If the computer crashes after being moved , it may be that the computer was greatly shaken during the movement, causing the internal components of the computer to loosen and cause poor contact, resulting in a crash;

Step 4. Open the machine and retighten the memory, graphics card, hard disk and other devices;

Step 5. Motherboard failure is the main reason why the laptop cannot turn on. It is often caused by factors such as liquid entering the notebook, being dropped, and the components of the motherboard itself being damaged;

Step 6. After the notebook is turned on, the power indicator light is on, and if there is a display on the monitor screen, but the system cannot be entered, this situation Most of them are caused by system failure;

Step 7. You can try to turn on the computer and press F8 to enter safe mode, and then enter the last security configuration to try. If it still doesn’t work, it is recommended to reinstall the system

## What should I do if the #ASUS motherboard cannot enter the system?

Specific reasons and solutions:

Cause 1. Caused by external equipment

Solution: Generally speaking, when encountering this kind of problem, it may be caused by external equipment. First Unplug all USB devices on the computer (such as keyboard, mouse, camera, USB wireless network card, etc.), including the keyboard and mouse of the PS/2 interface, leaving only the video cable of the monitor, and then try restarting.

Cause 2. Motherboard BIOS error leads to

Solution: Motherboard BIOS error can also cause the computer to be stuck on the startup LOGO screen. If you can enter the motherboard BIOS, directly initialize the BIOS setting information , then press F10 to save and exit and restart the computer.

If you cannot enter the motherboard BIOS settings, you can remove the motherboard's button battery and put it back in place, or you can restore the BIOS settings to the default settings to complete the initialization of the BIOS setting information.

Cause 3. The hard disk or hard disk SATA data cable is damaged.

Solution: Generally speaking, as soon as the computer is turned on, the device self-test is first performed. If the computer is stuck on the startup screen, Another situation is that the hard disk detection has not passed. Try unplugging the hard disk cables and restarting the computer.

Cause 4: Motherboard or memory failure causes

to re-insert and unplug the memory. It is best to wipe the memory gold finger. If it does not work, consider whether the problem is caused by motherboard failure or memory failure. If so, For multiple memory sticks, you can use the elimination method and try alternately.

Asus h610 motherboard cannot boot into the system?

The following causes and solutions

1: Unplug the computer power cord first, and press the power button on the chassis 5-6 times. Release the residual charge on the motherboard.

2, then open the side panel of the chassis, insert and remove the memory slots.

3. Remove the CMOS battery from the motherboard and reinstall it after 1 minute. If your computer has a separate graphics card, it is best to plug and unplug the graphics card. After completing the above operations, power on the computer again. The fault still requires booting using the minimum system method: (power supply, motherboard, CPU memory, graphics card, monitor). At this time, you should normally see the display content, and a prompt such as the hard disk or keyboard cannot be detected will pop up. You can enter the bios, and the buzzer will not beep abnormally. If it is abnormal, the display may not display (or the screen may be blurry) or the buzzer may sound abnormally.

(1) Memory problem a. The problem itself. It doesn't work in any slot, nor on other machines. Then the only option is to replace the memory. The buzzer usually makes an abnormal sound. b. Compatibility issues. Other machines can be used, but not this one; or a single cord can be used, but two cords cannot be used. Replace the memory. (2) Monitor/graphics card problem a. Connection problem. Check whether there are broken needles or short circuits. b. The graphics card itself is damaged. c. The display is damaged (very unlikely) b. Motherboard problem. The graphics card slot or related control circuit is faulty. At this time, the only solution is to replace the motherboard

Материнская плата ASUS не может войти в систему и остается на странице материнской платы?

После включения компьютера дисплей всегда на странице материнской платы ASUS и не может зайти в систему.Решение: Можно попробовать.При включении компьютера нажать "F8", нажать Enter, нажать Входим, «Войти в безопасный режим», и находим: «Последний раз «Правильные настройки», нажимаем и пробуем.

Если все равно не работает, предлагаю сделать: «Восстановление в один клик». Пожалуйста, ознакомьтесь с этим методом «восстановления системы».Он может не только помочь вам отремонтировать и восстановить компьютерную систему, но и сохранить все файлы на диске. После включения компьютера (управлять им можно только после отображения «марки» компьютера)! Нажмите горячую клавишу «Спасение одной клавишей» в дальнем правом углу клавиатуры (знак « » на маленькой клавиатуре) (для ноутбуков: F2 или F11), затем подождите немного и нажмите «Глубокое восстановление одной клавишей». дождаться "Спасения и копирования" системы Все файлы диска, (Примечание: После восстановления не выключайте и не перезагружайте компьютер. Следует сразу "выйти на основную платформу", то есть на "рабочий стол", иначе "все усилия будут напрасны» и «восстановление будет недействительным»! Компьютер немедленно вернется в «заводское состояние»! Начните загрузку «360 Security Guard» и «360 Antivirus Dual Engine Edition», запустите комплексное сканирование на наличие вирусов и троянов и устранять уязвимости компьютера!

«Заводское состояние»: это состояние, когда вы только что купили его, все программное обеспечение на месте, нет необходимости «переустанавливать систему», что гораздо более «беззаботно». " чем переустанавливать! Или достаньте "Инструкцию по эксплуатации" при покупке компьютера и сравните с "Восстановлением системы"! Расширение:

1. Если компьютер включается с черным экраном Если еще есть звук, рекомендуется удалить внутренние части компьютера, протереть его золотым пальцем или переустановить;

2. Выберите последнюю конфигурацию, чтобы проверить, доступна ли она. Если все еще нет не работает, пожалуйста, войдите в безопасный режим. ;

3. Войдите в безопасный режим и удалите какое-то грязное программное обеспечение;

4. Если это по-прежнему не работает, рекомендуется переустановить систему;

5.Переустановить систему После этого необходимо бережно относиться к компьютеру, иначе будут неприятности, если снова появится черный экран.Постарайтесь хранить как можно меньше вещей на диске С;

6. Просто дезинфицируйте компьютер и регулярно убирайте мусор.

The above is the detailed content of The ASUS motherboard cannot start the operating system and remains stuck in the BIOS interface?. For more information, please follow other related articles on the PHP Chinese website!