MSI motherboard BIOS settings for solid-state boot require turning on or restarting the computer. When the logo appears on the screen, click the buttons in quick succession until you enter the BIOS interface. After entering the BIOS, use the mouse to double-click the option, double-click the option, double-click, find the solid-state drive and double-click it, and press save to exit. The specific operations are as follows:
This article uses MSI Haihuangji; Windows 10 as a case to explain.
1. Turn on or restart the computer. When the logo appears on the screen, click the keys quickly until you enter the BIOS interface.
2. Enter the BIOS interface and use the mouse to click to open the option (you can also use the arrow keys to select and the Enter key to confirm).
3. Enter - in sequence, find the name of the solid state drive in the list and select it.
4. Press and click Save to exit.
Note: If you cannot find the name of the solid state drive in the list, you can press the key to return to the menu. Find and double-click it, set it as a solid-state drive, and then perform the above operations.
To set which hard drive to boot, you can follow the steps below:
1. Press the Del key or F2 key to enter the BIOS setting interface when booting.
2. In the BIOS setting interface, use the direction keys to select the "Boot" option and press the Enter key to enter.
3. In the boot options, you can see the list of hard drives. Use the arrow keys to select the option you want to set as your bootable hard drive and press Enter to enter.
4. In the selected hard disk option, you can see the boot sequence settings. Use the arrow keys to move the hard drive you want to set as the first boot option to the top and press Enter to confirm.
5. Save the settings and exit the BIOS interface. Normally, you can press the F10 key to save settings and exit.
After completing the above steps, your MSI B460 will boot from the hard drive you selected. Please note that different BIOS versions may vary, so the above steps may vary. If you encounter any problems, it is recommended that you refer to the MSI B460 user manual or contact MSI technical support for more detailed guidance.
MSI b460 sets the hard disk startup sequence by the BIOS. Turn on the MSI b460 computer, press the del key, enter the BIOS system, select the boot option, and select the startup disk sequence in the boot disk drop-down list
The BIOS startup item setting method for MSI B85 motherboard is as follows:
1. Press the "Delete" key when booting to enter the BIOS setting interface.
2. Switch to the "Boot" menu and you can see "Boot Option Priorities".
3. Under this menu, you can select "Boot Option #1" (Startup Option 1), "Boot Option #2" (Startup Option 2), etc., select according to actual needs.
4. After selecting the corresponding startup item, press the "Enter" key, you will see a menu and select the device that needs to be started, such as hard disk, optical drive, U disk, etc.
5. After the startup item settings are completed, press the "F10" key to save the settings and exit the BIOS.
It should be noted that the interface and setting method may be slightly different for different BIOS versions, but the general steps are similar. If you are not sure how to set up the BIOS, it is recommended to consult the motherboard manual or consult after-sales service personnel.
1. Turn on or restart the computer. When the logo appears on the screen, click the buttons quickly until you enter the BIOS interface.
2. Enter the BIOS interface and use the mouse to click to open the option (you can also use the arrow keys to select and the Enter key to confirm).
3. Enter - in sequence, find the name of the solid state drive in the list and select it.
4. Press and click Save to exit.
Note: If you cannot find the name of the solid state drive in the list, you can press the key to return to the menu. Find and double-click it, set it as a solid-state drive, and then perform the above operations.
Cause: The operation steps are incorrect.
Solution:
1. Restart the computer with a fixed hard disk and press the F2 button on the keyboard while restarting.
2. Enter the bios interface and select the boot option in the title bar.
3. Enter the boot interface. At the bottom of the interface, you can see the boot sequence and find the name of your solid state drive.
4. Then press the F5 or F6 button to adjust the solid state drive option to the first position.
5. After setting, press the F10 key on the keyboard, and then a small window to exit and save will pop up. Click the yes option here.
6. Finally, the computer will restart. If the system is installed on the fixed hard drive, it will start from the solid state drive first.
The answer is as follows
1. Turn on the computer and observe the key prompt to enter the bios displayed on the computer startup interface. Because computers with different motherboards have different keys to enter the bios, we can use this method to enter the bios. middle.
2. Enter the computer bios setting interface. Here we take the phoenix version of bios as an example.
3. Move the cursor to "main", then use the "↓ key" to move to "SATA Mode: [AHCI Mode]", and press the Enter key. You can see that the motherboard supports two modes. That is, "IDE Mode" and "AHCI Mode" types.
4. Then use the "→ key" on the keyboard to move to "exit", select "Exit Saving Changes" and press Enter,
5. In the pop-up "setup confirmation" Select "yes" and press Enter.
Different BIOS settings have different methods, so there are also differences in the methods of changing the hard disk mode in the BIOS, but it is not difficult as long as we find the basic solution through basic problems. In fact, the solution is the same. We You can also use the above ideas to solve the problem of changing the hard disk mode in other versions of bios.
1
Turn on the computer and press the or key to enter the bios interface when entering the startup screen
2
After entering the interface, click the drop-down language menu in the upper right corner. Set the language text to Chinese, then click
3
After clicking, find and click to enter
4
After entering, select the U disk, select Hard disk, so that the first startup item is the U disk
5
After setting, press (F10 is to save and exit), click, it will automatically restart after clicking, and enter the first startup item. That is, U disk
The above is the detailed content of How to configure the hard disk boot in BIOS for MSI h410m motherboard?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
