Configure default gateway

Steps to configure default gateway: 1. Open the control panel; 2. Select Network and Internet; 3. Configure network connection; 4. Configure IP address; 5. Configure DNS server address; 6. Confirm configuration; 7 , Restart the network device. Detailed introduction: 1. Open the Control Panel, in Windows system, click the Start menu, select "Control Panel"; 2. Select Network and Internet, in the Control Panel, select "Network and Internet"; 3. Configure network connections, etc. .

Configuring the default gateway is an important part of network settings. It determines which router the computer uses to access the Internet. Before configuring the default gateway, you need to understand some basic network knowledge, including IP addresses, subnet masks, routers, etc. The following are the detailed steps to configure default gateway in Windows system:

1. Open the Control Panel

In Windows system, click the Start menu and select "Control Panel" .

2. Select Network and Internet

In the control panel, select "Network and Internet".

3. Configure the network connection

In the network and Internet settings, find and select the network connection you are using (usually shown as a wired or wireless network card).

4. Configure IP address

In the opened network connection settings, find and select "Properties", then select "Internet Protocol Version 4 (TCP/IPv4) ". In the pop-up dialog box, select the "Use the following IP address" option. Then fill in the corresponding IP address, subnet mask and default gateway address according to your network configuration.

5. Configure the DNS server address

In the same Internet Protocol version 4 property settings, find the "DNS Server" option. If you are not sure of the DNS server address, you can contact your Internet service provider or router manufacturer to obtain it. Fill in the DNS server address into the appropriate fields.

6. Confirm configuration

Confirm that you have filled in all the configuration information correctly. If your configuration is wrong, you can verify it by clicking the "Check" button. After confirming that all configurations are correct, click the "Apply" or "OK" button to save your settings.

7. Restart the network device

Sometimes, you may need to restart your computer or network device to make the new default gateway settings take effect. After restarting your computer or network device, check to see if your network connection is working properly. If you still can't connect to the internet, check that your network connection settings are correct and make sure your default gateway is configured correctly. If the problem persists, try restarting your computer or device and checking the network connection again.

The above is the detailed content of Configure default gateway. For more information, please follow other related articles on the PHP Chinese website!