How to install the system without ghost

To install the system without ghost, use the installation CD to install Install the CD. When you see the word "CD" appears at the bottom of the screen, press the Enter key to achieve optical boot; 3. Driver installation, restart the computer after installing all drivers, and the driver installation is completed.

The operating environment of this tutorial: windows10 system, ghost15.0 version, Dell G3 computer.

How to install non-Ghost system

Use the installation CD to install xp.

The first step is to set up the optical boot:

The so-called optical boot means that the computer first reads the optical drive when it starts. In this case, if there is a CD with optical boot function in the optical drive It can be read out before the hard disk starts (such as when installing the system from the CD).

Setting method:

1. Start the computer and hold down the DEL key until the BIOS setting window appears (usually with a blue background and yellow English characters).

2. Select and enter the second item, "BIOS SETUP". Find the item or group containing the BOOT text inside, and find the three items "FIRST", "SECEND" and "THIRD" arranged in order, which represent "first startup", "second startup" and "third startup" respectively. Here we set it to "optical drive", "floppy drive" and "hard disk" in order. (If you do not see these three E-texts on this page, usually the option menu on the right side of BOOT is "SETUP", then press Enter to enter and you can see it) You should select "FIRST" and hit the Enter key. Select CD-ROM from the submenu. Press the Enter key again

3. After selecting the startup method, press the F10 key. An E text dialog box will appear. Press the "Y" key (can be omitted) and press Enter. The computer will automatically restart to prove the base state change. The settings take effect.

The second step is to install the XP system from the CD

Insert the XP installation CD before restarting. When you see the word CD appear at the bottom of the screen, press the Enter key to achieve light startup. . Otherwise, the computer starts to read the hard disk, that is, it skips the optical boot and boots from the hard disk.

After the XP system disk is booted, there will be an installation interface with a blue background. At this time, the system will automatically analyze the computer information. No operation is required until the monitor screen turns black, and then a Chinese interface with a blue background will appear. .

The first thing that appears at this time is the XP system agreement. Press the F8 key (meaning you agree to this agreement), and then you can see the information list of all partitions of the hard disk, and there are Chinese operation instructions. Select the C drive, press the D key to delete the partition (remember to back up the useful files on the C drive first), change the location of the C drive to "unpartitioned", and then press C at the original C drive location (i.e. the "unpartitioned" location) The key creates a partition, and the partition size does not need to be adjusted. After that, the original C drive location changes to "New Unused", press Enter to continue.

Next, the format partition option page may appear. It is recommended to select "Format partition with FAT32 (fast)". Press Enter to continue.

The system starts to format the C drive very quickly. After formatting, it analyzes the hard disk and the previous WINDOWS operating system, which is also very fast, followed by copying the files, which takes about 8 to 13 minutes (depending on the configuration of the machine).

After copying files is completed (100%), the system will automatically restart. When you see the CD-ROM again..., you do not need to press any keys to let the system boot from the hard disk. Because part of the installation file has been copied to the hard disk (note: the CD cannot be removed at this time).

A color XP installation interface with a blue background appears, with an installation progress bar and remaining time display on the left. The starting value is 39 minutes, which is also determined by the configuration of the machine. Usually the installation time of P4 and 2.4 machines It's about 15 to 20 minutes.

At this point, until the installation is completed and the computer automatically restarts, there is no need to do any other operations except entering the serial number and computer information (fill in whatever you want), and hitting Enter 2 to 3 times. The system will automatically complete the installation.

The third step, driver installation

1. After restarting, take out the CD, let the computer boot from the hard disk, and enter the XP settings window.

2. Press "Next", "Skip", select "Do Not Register", and "Finish".

3. Enter the XP system desktop.

4. Right-click on the desktop, select "Properties", select the "Display" tab, click the "Customize Desktop" item, check "My Computer", and select "OK" to exit.

5. Return to the desktop, right-click "My Computer", select "Properties", select the "Hardware" tab, select "Device Manager", which contains the management window for all hardware of the computer, including all The option with a yellow question mark + exclamation mark in front of it represents the hardware for which the driver is not installed. Double-click to open its properties, select "Reinstall Driver", insert the corresponding driver CD, select "Automatic Install", and the system will automatically identify the corresponding driver. and the installation is completed. (AUDIO is the sound card, VGA is the graphics card, and SM is the motherboard. You need to install the motherboard driver first. If there is no SM item, it means there is no need to install it). Restart your computer after installing all drivers. The driver installation is now complete.

The above is the detailed content of How to install the system without ghost. For more information, please follow other related articles on the PHP Chinese website!