Is it normal that the graphics card fan is not spinning?

It is abnormal for the graphics card fan not to rotate. The reasons are: 1. The graphics card fan or chip circuit is faulty; 2. Check whether the graphics card fan is stuck. You can turn it by hand to see if the fan can respond. ; 3. Use the diagnostic card to diagnose. Currently, some graphics cards have stalling technology. Intelligent stalling means they will not rotate when the temperature is less than 60 degrees.

#The operating environment of this tutorial: Windows 10 system, Dell G3 computer.

Is it normal that the graphics card fan is not spinning?

unusual.

There are several reasons:

1. It is judged that the graphics card fan or chip circuit is faulty. Currently, as long as the independent graphics card is connected and turned on, the fan will keep rotating. Let the graphics card dissipate heat. The specific speed is based on the temperature sensor on the graphics card to adjust the current temperature of the graphics card;

2. You can check whether the graphics card fan is stuck. You can turn it by hand to see if the fan can respond. First Check the hardware. The second step is whether the sensor on the graphics card is faulty. The last step is whether the power supply voltage of the graphics card is stable.

3. After ruling out the fan problem, you can test it. Use the diagnostic card to diagnose. Currently, some graphics cards are With stall technology, the smart stall means that the fan will not rotate when the temperature reaches 60 degrees. The fan will rotate when it is turned on. After entering the system, the fan will stop when the temperature does not reach 60 degrees and the fan speed will be automatically adjusted.

Extended information:

Graphics card fan:

Graphics card fan, how to better dissipate heat in the computer case. High-end radiators not only have excellent performance, but also have excellent appearance design, so they are coveted by many mass users.

Cause of loud noise

The graphics card fan has a lack of oil in the bearing and the bearing hole is worn - the gap between the fan shaft and the bearing is too large. After the fan rotates, it moves axially, and the rotation plane of the fan blades also shakes. Not only does the wear become more and more severe, but also a lot of noise is produced.

For more related knowledge, please visit the FAQ column!

The above is the detailed content of Is it normal that the graphics card fan is not spinning?. For more information, please follow other related articles on the PHP Chinese website!