PHP method to implement token bucket current limiting: 1. Set up a token bucket and store tokens in the bucket; 2. Take a token from the bucket for each visit; 3. According to the actual situation , just put in a few tokens every once in a while or just fill up the token bucket directly.
#The operating environment of this article: Windows7 system, PHP7.1, Dell G3 computer.
How does PHP implement token bucket current limiting?
php uses token bucket algorithm to implement flow control based on redis
##This article introduces PHP based on redis and uses the token bucket algorithm to control access traffic. It provides a complete algorithm description and demonstration examples for everyone to learn and use. Whenever there are long domestic holidays or important festivals, domestic scenic spots or subways will be crowded with people, resulting in excessive load. Some will adopt flow limiting measures to limit the number of people entering. When the number of people in the area is reduced to a certain value , and then allow entry.For example: The maximum number of people allowed in the area is
M The current number of people in the area is
N Every entry One person,
N 1, when N = M, is not allowed to enter Every time a person leaves,
N-1, when When N < Overloaded with work. Of course we can add servers to share the pressure. First of all, adding servers also takes a certain amount of time to configure, and if servers are added because of a certain activity, these server resources will be wasted after the activity is over.
Therefore, we can first use
current limiting
to reduce server pressure according to the business type. Different from the traffic limit in scenic spots, the time from visit to end of the system is very short, so we only need to know the average duration of each visit and set the maximum number of simultaneous visitors. .
Token Bucket Algorithm
1. First, there is a token bucket, and tokens are stored in the bucket. At the beginning, the tokens in the token bucket are full (the bucket The number of tokens can be set according to server conditions).
3. Every once in a while, add tokens until the bucket is full of tokens. (You can put in several tokens at regular intervals according to the actual situation, or directly fill up the token bucket)
We can use the queue of
redisas the token bucket container, Use
lPush (enqueue), rPop (dequeue) to implement token addition and consumption operations. TrafficShaper.class.phpdemo:<?php
/**
* PHP基于Redis使用令牌桶算法实现流量控制
* Date: 2018-02-23
* Author: fdipzone
* Version: 1.0
*
* Descripton:
* php基于Redis使用令牌桶算法实现流量控制，使用redis的队列作为令牌桶容器，入队（lPush）出队（rPop)作为令牌的加入与消耗操作。
*
* Func:
* public add 加入令牌
* public get 获取令牌
* public reset 重设令牌桶
* private connect 创建redis连接
*/class TrafficShaper{ // class start
private $_config; // redis设定
private $_redis; // redis对象
private $_queue; // 令牌桶
private $_max; // 最大令牌数
/**
* 初始化
* @param Array $config redis连接设定
*/
public function __construct($config, $queue, $max){
$this->_config = $config; $this->_queue = $queue; $this->_max = $max; $this->_redis = $this->connect();
} /**
* 加入令牌
* @param Int $num 加入的令牌数量
* @return Int 加入的数量
*/
public function add($num=0){
// 当前剩余令牌数
$curnum = intval($this->_redis->lSize($this->_queue)); // 最大令牌数
$maxnum = intval($this->_max); // 计算最大可加入的令牌数量，不能超过最大令牌数
$num = $maxnum>=$curnum+$num? $num : $maxnum-$curnum; // 加入令牌
if($num>0){ $token = array_fill(0, $num, 1); $this->_redis->lPush($this->_queue, ...$token); return $num;
} return 0;
} /**
* 获取令牌
* @return Boolean
*/
public function get(){
return $this->_redis->rPop($this->_queue)? true : false;
} /**
* 重设令牌桶，填满令牌
*/
public function reset(){
$this->_redis->delete($this->_queue); $this->add($this->_max);
} /**
* 创建redis连接
* @return Link
*/
private function connect(){
try{ $redis = new Redis(); $redis->connect($this->_config['host'],$this->_config['port'],$this->_config['timeout'],$this->_config['reserved'],$this->_config['retry_interval']); if(empty($this->_config['auth'])){ $redis->auth($this->_config['auth']);
} $redis->select($this->_config['index']);
}catch(RedisException $e){ throw new Exception($e->getMessage()); return false;
} return $redis;
}
} // class end?>Copy after login
Output: <?php
/**
* 演示令牌加入与消耗
*/
require 'TrafficShaper.class.php';
// redis连接设定
$config = array(
'host' => 'localhost',
'port' => 6379,
'index' => 0,
'auth' => '',
'timeout' => 1,
'reserved' => NULL,
'retry_interval' => 100,
);
// 令牌桶容器
$queue = 'mycontainer';
// 最大令牌数
$max = 5;
// 创建TrafficShaper对象
$oTrafficShaper = new TrafficShaper($config, $queue, $max);
// 重设令牌桶，填满令牌
$oTrafficShaper->reset();
// 循环获取令牌，令牌桶内只有5个令牌，因此最后3次获取失败
for($i=0; $i<8; $i++){
var_dump($oTrafficShaper->get());
}
// 加入10个令牌，最大令牌为5，因此只能加入5个
$add_num = $oTrafficShaper->add(10);
var_dump($add_num);
// 循环获取令牌，令牌桶内只有5个令牌，因此最后1次获取失败
for($i=0; $i<6; $i++){
var_dump($oTrafficShaper->get());
}
?>Copy after login
boolean true boolean true boolean true boolean true boolean true boolean false boolean false boolean false int 5 boolean true boolean true boolean true boolean true boolean true boolean false
Regularly adding token algorithmRegularly adding tokens, we can use crontab to implement it, and call the add method to add several tokens every minute.
We can optimize the algorithm for adding tokens and add several tokens every few seconds within a minute. This can ensure that there is a chance to obtain tokens every time within a minute.
The token joining program called by crontab is as follows, automatically adding 3 tokens per second.
<?php
/**
* 定时任务加入令牌
*/
require 'TrafficShaper.class.php';
// redis连接设定
$config = array(
'host' => 'localhost',
'port' => 6379,
'index' => 0,
'auth' => '',
'timeout' => 1,
'reserved' => NULL,
'retry_interval' => 100,
);
// 令牌桶容器
$queue = 'mycontainer';
// 最大令牌数
$max = 10;
// 每次时间间隔加入的令牌数
$token_num = 3;
// 时间间隔，最好是能被60整除的数，保证覆盖每一分钟内所有的时间
$time_step = 1;
// 执行次数
$exec_num = (int)(60/$time_step);
// 创建TrafficShaper对象
$oTrafficShaper = new TrafficShaper($config, $queue, $max);
for($i=0; $i<$exec_num; $i++){
$add_num = $oTrafficShaper->add($token_num);
echo '['.date('Y-m-d H:i:s').'] add token num:'.$add_num.PHP_EOL;
sleep($time_step);
}
?><?php
/**
* 模拟用户访问消耗令牌，每段时间间隔消耗若干令牌
*/
require 'TrafficShaper.class.php';
// redis连接设定
$config = array(
'host' => 'localhost',
'port' => 6379,
'index' => 0,
'auth' => '',
'timeout' => 1,
'reserved' => NULL,
'retry_interval' => 100,
);
// 令牌桶容器
$queue = 'mycontainer';
// 最大令牌数
$max = 10;
// 每次时间间隔随机消耗的令牌数量范围
$consume_token_range = array(2, 8);
// 时间间隔
$time_step = 1;
// 创建TrafficShaper对象
$oTrafficShaper = new TrafficShaper($config, $queue, $max);
// 重设令牌桶，填满令牌
$oTrafficShaper->reset();
// 执行令牌消耗
while(true){
$consume_num = mt_rand($consume_token_range[0], $consume_token_range[1]);
for($i=0; $i<$consume_num; $i++){
$status = $oTrafficShaper->get();
echo '['.date('Y-m-d H:i:s').'] consume token:'.($status? 'true' : 'false').PHP_EOL;
}
sleep($time_step);
}
?>Demonstration
Set a scheduled task and execute it once every minuteExecution simulation consumption* * * * * php /程序的路径/cron_add.php >> /tmp/cron_add.log
Copy after login
php consume_demo.php
Execution results :
[2018-02-23 11:42:57] consume token:true [2018-02-23 11:42:57] consume token:true [2018-02-23 11:42:57] consume token:true [2018-02-23 11:42:57] consume token:true [2018-02-23 11:42:57] consume token:true [2018-02-23 11:42:57] consume token:true [2018-02-23 11:42:57] consume token:true [2018-02-23 11:42:58] consume token:true [2018-02-23 11:42:58] consume token:true [2018-02-23 11:42:58] consume token:true [2018-02-23 11:42:58] consume token:true [2018-02-23 11:42:58] consume token:true [2018-02-23 11:42:58] consume token:true [2018-02-23 11:42:58] consume token:false [2018-02-23 11:42:59] consume token:true [2018-02-23 11:42:59] consume token:true [2018-02-23 11:42:59] consume token:true [2018-02-23 11:42:59] consume token:false [2018-02-23 11:42:59] consume token:false [2018-02-23 11:42:59] consume token:false [2018-02-23 11:42:59] consume token:false [2018-02-23 11:43:00] consume token:true [2018-02-23 11:43:00] consume token:true [2018-02-23 11:43:00] consume token:true [2018-02-23 11:43:00] consume token:false [2018-02-23 11:43:00] consume token:false
Because the token bucket is full at the beginning (the maximum number of tokens is 10), tokens can be obtained in the first 10 times. After 10 times, the tokens consumed will be greater than the joining token. When the number of cards is exceeded, access is restricted.
Recommended study: "PHP Video Tutorial
"
The above is the detailed content of How to implement token bucket current limiting in PHP. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
