How to convert unicode and utf8 in php

How to convert unicode to utf8 in php: 1. Convert to utf8. If the byte of a character is less than 128, there is no need to convert. Then take the binary digits from the low to high digits of the Unicode binary, and take 6 digits at a time. ;2. To convert utf8 to unicode, extract 0100 from the first high-order byte and shift it to the left in sequence.

How to convert unicode and utf8 in php:

Unicode and Utf-8 encoding Difference

Unicode is a character set, and UTF-8 is one of Unicode. Unicode is fixed-length and is double-byte, while UTF-8 is variable. For Chinese characters Say Unicode occupies 1 byte less than UTF-8. Unicode is double bytes, while Chinese characters in UTF-8 occupy three bytes.

UTF-8 encoded characters can theoretically be up to 6 bytes long, but 16-bit BMP (Basic Multilingual Plane) characters can only be up to 3 bytes long. Let's take a look at the UTF-8 encoding table: The position of

U-00000000 - U-0000007F: 0xxxxxxx U-00000080 - U-000007FF: 110xxxxx 10xxxxxx U-00000800 - U-0000FFFF: 1110xxxx 10xxxxxx 10xxxxxx U-00010000 - U-001FFFFF: 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx U-00200000 - U-03FFFFFF: 111110xx 10xxxxxx 10xxxxxx 10xxxxxx 10xxxxxx U-04000000 - U-7FFFFFFF: 1111110x 10xxxxxx 10xxxxxx 10xxxxxx 10xxxxxx 10xxxxxx

xxx is filled in by the binary representation of the character encoding number. The further to the right x has less special meaning, and only the shortest one is enough to express it. A multi-byte string of character encoding numbers. Note that in a multi-byte string, the number of "1"s at the beginning of the first byte is the number of bytes in the entire string. The first line starts with 0 to be compatible with ASCII encoding, which is one byte, the second line is a double-byte string, the third line is 3 bytes, such as Chinese characters, and so on. (Personally think: In fact, we can simply regard the number of 1’s in front as the number of bytes)

Related learning recommendations:PHP programming from entry to proficiency

How to convert Unicode to Utf-8

In order to convert Unicode to UTF-8, of course you must know what the difference is. Let’s take a look at how the encoding in Unicode is converted into UTF-8. In UTF-8, if the byte of a character is less than 0x80 (128), it is an ASCII character, occupying one byte, and no conversion is needed. Because UTF-8 is compatible with ASCII encoding. If the encoding of the Chinese character "you" in Unicode is "u4F60", convert it to binary to 100111101100000, and then convert it according to the UTF-8 method. Binary digits can be taken from the Unicode binary from low to high, taking 6 digits at a time. For example, the above binary digits can be taken out into the format shown below. The previous ones are filled according to the format, and any less than 8 bits are filled with 0.

unicode: 100111101100000 4F60 utf-8: 11100100,10111101,10100000 E4BDA0

From the above, you can intuitively see the conversion between Unicode and UTF-8. Of course, after knowing the format of UTF-8, you can perform the inverse operation, which is to convert it in binary according to the format. Take it out from the corresponding position, and then convert it to the resulting Unicode character (this operation can be completed through "displacement"). For example, in the above conversion of "you", since its value is greater than 0x800 and less than 0x10000, it can be judged as three-byte storage. Then the highest bit needs to be shifted to the right by "12" bits and then according to the three-byte format, the highest bit is 11100000 (0xE0 ) or (|) to get the highest value. In the same way, the second digit is shifted to the right by "6" bits, and the binary value of the highest digit and the second digit is left. It can be calculated by performing the position (&) operation with 111111 (0x3F), and then summed with 11000000 (0x80). or (|). There is no need to shift the third bit, just take the last six bits directly (& with 111111 (ox3F)), and then OR (|) with 11000000 (0x80).

How to reverse Utf-8 back to Unicode

Of course, the conversion from UTF-8 to Unicode is also done through shifting, etc., that is, converting UTF-8 The binary number at the corresponding position in the format is extracted. In the above example, "you" is three bytes, so each byte must be processed, from high bit to low bit. In UTF-8 "you" is 11100100,10111101,10100000. Starting from the high bit, that is, the first byte 11100100 is to take out the "0100". This is very simple. Just take the AND (&) with 11111 (0x1F). From the three bytes, we can know that the highest position must be before the 12th bit. , because six digits are taken each time. Therefore, the obtained result needs to be shifted to the left by 12 bits, and the highest bit is now 0100,000000,000000. The second bit is to take out "111101", so you only need to AND (&) the second byte 10111101 and 111111 (0x3F). After shifting the result to the left by 6 bits and taking the result of the highest byte or (|), the second bit is completed, and the result is 0100,111101,000000. By analogy, the last digit is directly ANDed (&) with 111111 (0x3F), and then ORed (|) with the previous result to get the result 0100,111101,100000.

PHP code implementation

/** * utf8字符转换成Unicode字符 * @param [type] $utf8_str Utf-8字符 * @return [type] Unicode字符 */ function utf8_str_to_unicode($utf8_str) { $unicode = 0; $unicode = (ord($utf8_str[0]) & 0x1F) << 12; $unicode |= (ord($utf8_str[1]) & 0x3F) << 6; $unicode |= (ord($utf8_str[2]) & 0x3F); return dechex($unicode); } /** * Unicode字符转换成utf8字符 * @param [type] $unicode_str Unicode字符 * @return [type] Utf-8字符 */ function unicode_to_utf8($unicode_str) { $utf8_str = ''; $code = intval(hexdec($unicode_str)); //这里注意转换出来的code一定得是整形，这样才会正确的按位操作 $ord_1 = decbin(0xe0 | ($code >> 12)); $ord_2 = decbin(0x80 | (($code >> 6) & 0x3f)); $ord_3 = decbin(0x80 | ($code & 0x3f)); $utf8_str = chr(bindec($ord_1)) . chr(bindec($ord_2)) . chr(bindec($ord_3)); return $utf8_str; }

Tested it

$utf8_str = '我'; //这是汉字“你”的Unicode编码 $unicode_str = '4f6b'; //输出 6211 echo utf8_str_to_unicode($utf8_str) . "
"; //输出汉字“你” echo unicode_str_to_utf8($unicode_str);

The above conversions are for tests of Chinese characters [which are usually non-ASCII], because if they are ASCII, It's the same thing all over again, so there's no need to spend so much effort.

The above is the detailed content of How to convert unicode and utf8 in php. For more information, please follow other related articles on the PHP Chinese website!