php array basics

1. How to define an array: There are two main ways to create an array in PHP. Let’s take a look at how to create an array

(1) Create an array by directly assigning a value to each element.

The format is: $arrayname[key]=value;

where arrayname is the name of the array, key is the key of the array element, and value is the value of the element. The key can be a number such as 0, 1, 2, or 3, or a string. As shown below:
The code is as follows:

1 数组$array1的键值为：
'; 4 $array1[1]='a'; 5 $array1[2]='b'; 6 $array1[3]='c'; 7 print_r($array1); 8 9 //如果省略键的方式，则数组默认的键为从0开始递增的数值 10 echo '
数组$array2的键值为：
'; 11 $array2[]='a'; 12 $array2[]='b'; 13 $array2[]='c'; 14 print_r($array2); 15 16 //以字符串作为数组的键 17 echo '
数组$array3的键值为：
'; 18 $array3['one']='a'; 19 $array3['two']='b'; 20 $array3['three']='c'; 21 print_r($array3); 22 ?>

The output result of the above code is:

The key value of array $array1 is:

Array ( [1] => a [2] => b [3] => c )
The key value of array $array2 is:

Array ( [0] => a [1] => b [2] => c )
The key value of array $array3 is:

Array ([one] => a [two] => b [three] => c )

(2) Use the array function to directly define an array.

The format is: $arrayname=array(key1＝＞value1, key2＝＞value2);

where arrayname is the name of the array, key1 and key2 are the keys of the array, and value1 and value2 correspond to the values of key1 and key2 respectively.

Give an example, such as the following code:
The code is as follows:

1 'a',2=>'b',3=>'c'); 4 echo '
数组$array6的键和值为：
'; 5 print_r($array6); 6 //以字符串作为键 7 $array7=array('one'=>'a','two'=>'b','three'=>'c'); 8 echo '
数组$array7的键和值为：
'; 9 print_r($array7); 10 //省略键的写法 11 $array8=array('a','b','c'); 12 echo '
数组$array8的键和值为：
'; 13 print_r($array8); 14 ?>

The result is:

The keys and values of array $array6 are:

Array ( [1] => a [2] => b [3] => c )
The keys and values of array $array7 are:

Array ( [one] => a [two] => b [three] => c )
The keys of array $array8 The key and value are:

Array ([0] => a [1] => b [2] => c )

Note:

１＞If you specify an element for an array If a value is used as its key, the default key of all elements after this element will be the self-increasing, non-repeating value of the specified value.

It’s a bit difficult to understand simply by looking at the literal meaning. Let’s take a look at an example:

The following code:
The code is as follows:

1 

The result is:

Array ( [2] => ａ [3] = > b [4] => c [10] => d [11] => e [12] => f [9] => g [13] => h [14] => ; ｉ )

Explanation: The key of the seventh element is 9. Normally the key of the eighth element should be 10, but keys 10, 11 and 12 have been used by elements before, so the key of the eighth element is 13.

２＞Whether a number or a string is used as the key of an array element, it only represents the key of this element and has no direct relationship with the position of this element in the array. This is different from C# and other languages. The biggest difference between arrays. Here's an example.

The following code:
The code is as follows:

1 $array5[0]是空的！
'; 6 } 7 ?>

The result is:

$array5[0] is empty!

Explanation: $array5[0] represents the value of the element in the array whose key is the value 0 (it does not represent the first element of the array like C# and other languages), because the array only has the key string 'ｏｎ' For this element, no element has a key of 0, so $array5[0] is empty.

＞PHP supports two types of arrays: indexed array and associative array. The former uses numbers as keys, and the latter uses strings as keys. You can use a mix of numbers and strings as keys for elements when creating an array. The code is as follows:
The code is as follows:

1 'a',　2=>'b',　'one'=>'c',　'two'=>'d',　'e',　'f', 'g'); 3 echo '
数组$array9的键和值为：
'; 4 print_r($array9); 5 ?>

The result is:

The keys and values of array $array9 are:

Array ( [1] => a [2] => b [one] = > c [two] => d [3] => e [4] => f [5] => g )

４＞Variables can also be used as keys of arrays, as shown below:
Code As follows:

1 数组$array10的键和值为：
'; 9 print_r($array10); 10 ?>

The result is:

The keys and values of array $array10 are:

Array ( [one] => a [two] => b [three] => c )

two , How to access the elements of the array

1. General method

To get an element in the array, just use the array name plus square brackets and a key. The calling method is as follows:

$arrayname[key ];

2. Use foreach results to traverse the array

If you want to access each array element, you can use a foreach loop:

Foreach ($array as $value)

{

//Do something with $value

}

Foreach loop will iterate each element in the array $array and assign the value of each element to the $value variable. Here is an example:
The code is as follows:

1 数组$array11的值为：'; 4 foreach($array11 as $value) 5 { 6 echo $value.','; 7 } 8 echo '
'; 9 ?>

The output result is:

array$ The values of array11 are: a,b,c,d,e,

使用foreach还可以同时访问数组元素的键和值，可以使用：

Foreach（$array as $key => $value）

{

//Do something with $key and $value

}

其中$key为每个元素的键，$value元素的值，下面的代码演示如何使用foreach结构创建一个下拉框：
代码如下:

1 1,'two'=>2,'three'=>3,'four'=>4,'five'=>5); 3 echo ''; 4 foreach($array12 as $key => $value) 5 { 6 echo "$key"; 7 } 8 echo ''; 9 ?>

３、 使用list函数访问数组

List函数是把数组中的值赋给一些变量，其函数语法如下：

Void list(mixed varname, mixed varname2……)

看如下示例：
代码如下:

1 '; 7 //赋值给部分变量 8 list($flag2,,$grassland2)=$array13; 9 echo "$flag2 $grassland2"; 10 echo '
'; 11 //只赋值给第三个变量 12 list(,,$grassland3)=$array13; 13 echo "$grassland3"; 14 echo '
'; 15 ?>

输出结果为：

red blue green
red green
green

注意: list() 仅能用于数字索引的数组并且数字索引必须从 0 开始。

因为list函数是先把数组中键为0的元素值赋值给第一个变量，再把键为1的元素值赋值给第二个变量，以此类推，所以list函数中的变量个数和位置必须和数组中的数字键相对应，才能获得想要的值，而且list函数是访问不到以字符串作为键的数组元素的。如下所示：
代码如下:

1 'red','blue','green'); 3 list($flag1,$sky1,$grassland1)=$array13; 4 echo '$flag1的值为：'.$flag1.'
'; 5 echo '$sky1的值为：'.$sky1.'
'; 6 echo '$grassland1的值为：'.$grassland1.'
'; 7 ?>

其输出结果为：

$flag1的值为：
$sky1的值为：red
$grassland1的值为：blue

说明：因为$flag1的值本应为数组中键为0的元素值，但此数组首元素是以1为键，没有键为0的元素，所以$flag1的值为空，因此也导致后面$sky1和$grassland1的值发生了变化。

４、 使用each函数访问数组

each 函数是返回数组中当前的键／值对并将数组指针向前移动一步，注意是一对，下面详细说明。该函数语法：

array each ( array &$array )

返回 array 数组中当前指针位置的键／值对并向前移动数组指针。每一个键值对被返回为四个单元的数组，键值为 0，1，key 和 value四个元素。元素 0 和 key 包含有数组单元的键名，1 和 value 包含有数据。如果内部指针越过了数组的末端，则 each() 返回 FALSE。这里面为什么each函数有四个下表呢？其实each函数得到这四个下标只是方便我们操作而已，我们可以用0,1作为索引，也可以用key,value作为索引。请看下列代码：
代码如下:

1 
"; 4 $a=each($arr); 5 echo "我在\$arr数组中的键为：".$a['0']; 6 echo "
"; 7 echo "我在\$arr数组中的值为：".$a['1']; 8 echo "

"; 9 echo "当我们用key,value为索引时：

"; 10 $b=each($arr); 11 echo "我在\$arr数组中的键为：".$b['key']; 12 echo "
"; 13 echo "我在\$arr数组中的值为：".$b['value']; 14 ?>

显示为：

当我们用0,1为索引时：
我在$arr数组中的键为：0
我在$arr数组中的值为：我是第一个值
当我们用key,value为索引时：

我在$arr数组中的键为：1
我在$arr数组中的值为：我是第二个值

５、 用each函数与list函数结合来遍历数组，如下例：
代码如下:

1  'apple', 'b' => 'banana', 'c' => 'cranberry'); 3 while(list($key,$value) = each($array14)) 4 { 5 echo "$key => $value\n"; 6 } 7 ?>

其输出结果为：

a => apple b => banana c => cranberry

6、使用for循环访问数组

如下例所示：
代码如下:

1 '; 6 } 7 ?>

输出结果为：

数组元素：a
数组元素：b
数组元素：c
数组元素：d
数组元素：e
数组元素：f