Troubled by iTunes not being able to restart your iPhone or iPad properly? Don’t worry, PHP editor Xigua brings you a detailed guide to help you solve this problem easily. The following summary will briefly explain the reasons and steps for force restarting your iTunes device, and guide you to read more details later.
1. Press and hold the power/lock screen button on the right side of the fuselage.
2. Press and hold the power/lock screen button and then press the volume down button on the left side.
3. When these buttons are pressed at the same time, the screen will turn off until the screen lights up again and the Apple logo appears.
How to operate: Connect the device to the computer, then open iTunes; with the device connected, force restart the device until you see the phone recovery mode screen. When you see the restore or update option, choose Update. iTunes will try to reinstall iOS but will not erase your data. Tunes will download the software for your device. The specific operations are as follows:
1. Connect the device to the computer, and then open iTunes.
2. When the device is connected, force restart the device. On iPhone 7 or iPhone 7 Plus: Press and hold the Sleep/Wake button and the Volume Down button simultaneously. On iPhone 6s and earlier, iPad, or iPod touch: Press and hold the Sleep/Wake button and the Home button simultaneously.
3. Do not release the button when you see the Apple logo. Keep pressing both buttons until you see the recovery mode screen.
4. When you see the restore or update option, select "Update". iTunes will try to reinstall iOS but will not erase your data.
5. Tunes will download the software for your device. If the download takes more than 15 minutes, the device will exit recovery mode and you will need to repeat steps 2 and 3 of method 3.
1. Press both buttons to restart the phone;
2. The first step is to prepare for backup, the second step is to start the backup, the third step is to prepare for program synchronization, and the fourth step is The program's mapping file is synchronized. The fifth step is to start copying the program to the mobile phone;
3. The inability to back up indicates that there is a problem with the iPhone system file. Apple cannot recognize the correct backup file, so the boot cannot be completed.
4. Give up the backup performed by iTunes and use the synchronization assistant instead.
5. Add the address book, photos, and memos in the synchronization assistant back to the phone.
Connect your phone to the computer, open iTunes, enter My Devices, find and see the key, the system will automatically identify the nearest system suitable for this device, click it, and click in the pop-up dialog box;
The system will automatically update. If you don’t want to upgrade to the latest system, you can download the required firmware yourself. On the My Device interface, press and hold and click at the same time. iTunes will pop up a file selection dialog window. Select the downloaded one. IOS firmware, click and wait for iTunes to run;
First of all, let’s talk about normal shutdown. Click the Windows icon at the bottom left of the screen, and a shutdown prompt will appear. Click Shut Down to shut down normally.
In the latest iOS 16 beta system, Siri supports voice shutdown and restart. Just say "shut down" to Siri and click the button to confirm, and Siri will turn off your iPhone directly. In iOS 16 and newer versions, you can also ask Siri to help you quickly restart your phone. Before using this method, you need to make sure the "Hey Siri" feature is enabled.
You can go to iPhone Settings - Siri & Search and turn on the switch next to Wake with "Hey Siri".
Then when you need to restart your iPhone, you can just say, "Hey Siri, re-enable iPhone."
At this time, Siri will display a pop-up window asking whether to confirm the restart. Say "Yes" to confirm, or click the "Restart" button that appears on the screen.
Activation method: 1. Users must understand that when the iPhone or iPad is connected to the network, itunes needs to be installed on the computer. In itunes, you will find a step-by-step guide. 2. Run itunes and you will see the main operating interface of iTunes. The structure of the main interface of iTunes is relatively simple, consisting of menu bar, control bar, database, device, content area, and information area. 3. Connect the unactivated iPhone or iPad to the computer with the data cable. After connecting, iTunes will automatically detect the device. When an unactivated device is detected, a registration wizard will pop up to guide the user to activate the device. (1) Click directly to continue. (2) Register an iTunes account (Apple ID). If you have an Apple ID, log in directly. If you don't have an Apple ID, select "I don't have an Apple ID" and select a country. (3) Set the name of the device, select the information that needs to be synchronized, and confirm.
If the computer restarts indefinitely when using the CMD command, it may be caused by using the wrong command or parameter. You can try the following methods to solve this problem:
1. Enter safe mode
Press F8 or Shift+F8 when the computer is turned on to enter safe mode. In safe mode, you can try to solve the problem by using system restore or uninstalling recently installed software.
2. Use System Restore
In safe mode, you can use System Restore to restore the system to a previous point in time and restore the system to its normal state.
3. Execute the sfc /scannow command
Execute the sfc /scannow command in CMD. This command can scan system files and repair damaged files. Press the Enter key after entering the command in CMD and wait for the scanning and repair to complete.
4. Reinstall the operating system
If none of the above methods can solve the problem, the final solution is to reinstall the operating system. Before reinstalling your operating system, back up your important files and data.
In short, if the CMD command causes the computer to restart indefinitely, you can try the above methods first to solve it. If the problem persists, it is recommended that you contact professional technical support or computer repair center for further processing.
It cannot be shared. iTunes is a software app and does not have the function of sharing the network.
1. First, you need to download the iTunes application on your computer. You can download it from the Apple iTunes official website. After downloading Installation, no need to open it after installation (the purpose of installing iTunes is that during the iTunes installation process, it will automatically install the drivers required for iPhone to connect to the computer).
2. Connect the iPhone to the USB port of the computer with a data cable. The phone will pop up whether to trust the computer. Select "Trust".
3. Select "Personal Hotspot" in settings.
4. Slide the switch of the personal hotspot to the right and turn it on. Then the status bar of the phone will display a hotspot that is being connected. At this time, the computer can use the phone's traffic to access the Internet.
<meta charset="UTF-8"> <title> How to delete mobile music in iTunes</title> <h1>How to delete mobile music in iTunes</h1> <code> <meta charset="UTF-8"> <title>怎么在iTunes删除手机音乐</title> <h1>怎么在iTunes删除手机音乐</h1> <p>随着移动设备的普及，我们越来越多地使用iTunes来管理手机上的音乐。然而，有时候我们需要删除一些不再喜欢或不需要的歌曲。本文将指导您如何在iTunes上删除手机上的音乐。</p> <h2>步骤一：连接您的手机</h2> <p>首先，使用USB线连接您的手机和电脑。确保您的手机已经正确连接，并且iTunes已经自动打开。如果没有，请手动打开iTunes应用程序。</p> <h2>步骤二：选择您的设备</h2> <p>在iTunes界面的左上角，您会看到一个设备图标。点击该图标，进入您手机的信息页面。</p> <h2>步骤三：选择音乐选项卡</h2> <p>在您的设备信息页面上方，有一排选项卡，包括“概述”、“应用”、“声音”等等。点击选项卡中的“音乐”，进入音乐设置页面。</p> <h2>步骤四：删除音乐</h2> <p>在音乐设置页面中，您会看到手机上所有的音乐列表。这包括您通过iTunes下载的音乐以及从其他途径添加到手机上的音乐。选择你想要删除的歌曲或者整个专辑，然后点击鼠标右键。</p> <p>在出现的菜单中，选择“删除”选项。iTunes会要求您确认删除操作，请点击“删除”或“确认”按钮。</p> <h2>步骤五：同步您的设备</h2> <p>当您完成上述步骤后，您需要同步您的设备以应用所做的更改。在右下角，点击“应用”按钮，然后点击“同步”按钮。iTunes会自动更新您的设备和库中的音乐信息，删除您在之前选择删除的歌曲。</p> <h2>注意事项</h2> 在删除音乐之前，请确保您真的不再需要这些音乐。 删除音乐后，您将无法在手机上再次播放这些音乐。 确保备份您的音乐，以免意外删除后无法找回。 <h2>总结</h2> <p>使用iTunes删除手机上的音乐非常简单。只需连接您的设备，选择要删除的歌曲，确认删除操作，然后同步您的设备。但请记住，删除后无法恢复，因此在删除之前要三思而后行。</p>With the popularity of mobile devices, we are increasingly using iTunes to manage music on our mobile phones. music. However, sometimes we need to delete some songs that we no longer like or don't need. This article will guide you how to delete music on your phone on iTunes. Step 1: Connect your phone First, use a USB cable to connect your phone and computer. Make sure your phone is connected correctly and iTunes opens automatically. If not, open the iTunes app manually. Step 2: Select your device In the upper left corner of the iTunes interface, you will see a device icon. Click this icon to enter your phone's information page. Step 3: Select the Music tab Above your device information page, there is a row of tabs, including "Overview", "Apps", "Sounds" and more. Click "Music" in the tab to enter the music settings page. Step 4: Delete music In the music settings page, you will see a list of all the music on your phone. This includes music you downloaded through iTunes and music added to your phone from other sources. Select the song or entire album you want to delete and right-click. In the menu that appears, select the "Delete" option. iTunes will ask you to confirm the deletion operation, please click the "Delete" or "Confirm" button. Step Five: Sync your device When you complete the above steps, you need to sync your device to apply the changes. In the lower right corner, click the Apply button, then click the Sync button. iTunes will automatically update the music information on your device and library, removing songs you previously selected to delete. Notes Before deleting music, make sure you really don’t need it anymore. Once you delete music, you won't be able to play it again on your phone. Make sure to back up your music so you don't accidentally delete it and get it back. Summary Deleting music on your phone using iTunes is very simple. Simply connect your device, select the songs you want to delete, confirm the deletion, and sync your device. But remember, you can't recover it once you delete it, so think twice before deleting it. The above is the detailed content of How to force restart the phone in itunes?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
