There is no sound when the mobile phone is plugged into the computer speaker?

There is no sound when the mobile phone is plugged into the computer speaker, which is really distressing. PHP editor Zimo brings solutions to everyone, from checking hardware connections to adjusting software settings, analyzing them one by one. If you have also encountered this problem, you may wish to continue reading this article to find out the solution that suits you.

1. There is no sound when the mobile phone is plugged into the computer speaker?

1. When encountering this situation, first check whether the sound card driver is installed correctly, and there should be some settings on the sound card to set the microphone, and whether the speaker sound is checked and confirmed, and whether the volume is adjusted to Set the volume appropriately, then restart the computer and try again.

2. And you need to set the sound card to be external. It is recommended to turn off the sound card on the motherboard in the CMOS settings. This defaults to the external sound card.

2. What should I do if my desktop computer speakers have no sound?

Right-click on the Start menu, open Device Manager, click on Sound, Video and Game Controllers, right-click on Realtek audio to update the sound card driver, and select the first option. You can also right-click on the Start menu, find the Control Panel under Windows system, open Hardware and Sound, click on Sound, right-click on the speaker to enable

3. There is no sound when the AOC monitor is connected to the computer speaker?

The built-in speakers of the monitor and the host sound card need to be connected with an audio cable. The audio jacks of some monitors are 3.5mm, and some are 2.5mm. The sound card output plugs of the host are all 3.5mm. If both sides are 3.5mm jacks, you can use an ordinary audio cable to connect them. If one is a 3.5mm jack and the other is a 2.5mm jack, you just need to use the corresponding 3.5mm to 2.5mm adapter cable to adjust the volume of the speaker. Generally, In the control menu of the monitor itself, there is a volume adjustment. If the volume has been turned up to the maximum and there is still no sound from the speaker, then it is better to replace it. There may be a quality problem with the speaker.

4. There is no sound from the computer speakers, but there is sound when the USB headphones are plugged in. What’s going on?

So we have to use the troubleshooting method, 1. Check whether the audio settings are correct, 2. Check whether the audio can be used correctly in other computers, 3. Check whether the audio cable and motherboard interface are damaged to determine whether it is AC97 or HD, the driver should be fine , it seems to be a setting problem. 1. Open the Start menu, Control Panel; in System and Security, select Find and solve problems.

2. Open Hardware and Sound, and under the sound options, select Play Audio; in the Play Audio dialog box, click Next;

3. In the Fault dialog box, select Headphones, and click Next; at this time, It will give a diagnostic message: the peripheral is not plugged in; and give a fix suggestion: plug in speakers or headphones.

4. At this time, if you plug in headphones or speakers and click the Next button, the system will automatically change and repair it.

5. What should I do if the computer speakers have no sound and keep buzzing?

1. There is a problem with the computer audio. Check method: Unplug all plugs and connect the power supply directly to see if there is still a buzzing sound. If so, it is a problem with the computer audio. If not, the audio cable may be broken.

2. Caused by electromagnetic interference. Move the position of the speaker or audio cable to see if there is any improvement. 3. The plug of the audio cable is not inserted in place.

6. There is no sound when the computer host is plugged into the speaker?

There are two solutions: repairing the system and using software to install the sound card driver (first look at the small speaker or check in the control panel to see if the mute is set, and then check whether there is sound output through headphones. If so, it is the speaker or Speaker failure may be caused by damage to the sound card driver. If it is caused by software such as Driver Wizard, please install the sound card driver. If it is caused by a hardware problem and you cannot solve it yourself, it is recommended to send it for repair)

7. HP small No sound from the speakers to the computer?

1. There may be a connection problem. You need to check whether the connecting cable between the computer and the small speaker is tightly plugged in. A common situation is that the connecting cable is not plugged in properly, resulting in no sound. 2. There may also be a problem with the volume controller. You can check whether the small speaker is turned on and the correct volume is adjusted to ensure sound output. 3. If there is still no sound after the above two problems are eliminated, it may be a problem with the small speaker driver, and the driver needs to be reinstalled or updated.

8. How to connect computer speakers to the host but there is no sound?

The problem is to first make sure that the computer sound is not faulty, then make sure that the speaker is good, and then check whether the speaker cable jack is correct (blue sound output, that is, headphones, speakers, red is the sound input, that is, microphone). Finally check if the volume is on.

9. How to set up the settings when there is no sound when the computer is connected to the speakers?

There is no sound when the computer speakers are plugged in. First of all, hardware faults must be eliminated

1. Poor contact

The internal circuit of the speaker has aged due to long-term use. When the speaker is connected to the computer, there may be no sound due to poor contact

Solution: First check whether the speaker connection is normal. If there is still no sound after making sure it is intact, you can install the driver and have a look. If it is still not working after installing the driver, it means the speaker is broken.

2. The audio cable is not connected properly

　If the audio cable is not plugged into the corresponding jack, the volume of the audio is set to the minimum position, or the speaker is not powered, the computer will have no sound.

3. The audio volume is switched to mute or too low

Sometimes the volume is accidentally set to mute or the audio volume knob is adjusted to the minimum volume, and there will be no sound.

4. The computer sound card is damaged

Generally, the lack of sound in the computer is mostly related to the software, but the damage to the sound card itself does not rule out.

Solution: If it is determined that the sound card hardware is damaged, you can buy an independent sound card and plug it in.

Software reasons:

1. Sound card driver abnormality

　The sound card driver is disabled, the sound card driver is damaged, or an unsupported device driver is installed, which are the main reasons for the computer speaker to have no sound.

Solution: Right-click the "My Computer" icon, select "Properties" - "Hardware" - "Device Manager", open "Sound, Video, and Game Controllers". If a yellow "?" appears in front of it, it means The sound card driver is not installed properly. In this case, you only need to reinstall the sound card driver to solve the problem.

10. There is no sound when the Xiaoai speaker is connected to the computer?

1) After connecting the Bluetooth speaker, turn the Bluetooth volume to the minimum on your mobile phone or computer

(2) Directly forcibly turn off the Bluetooth speaker (turn off the switch directly, or unplug the power)

(3) Re-open the Bluetooth speaker

( 4) Wait for your phone or computer to connect to the Bluetooth speaker again and adjust the Bluetooth volume to normal

The above is the detailed content of There is no sound when the mobile phone is plugged into the computer speaker?. For more information, please follow other related articles on the PHP Chinese website!