Want to know how to check the IP address of a Lenovo computer? Lenovo PC IP lookup is essential for various network management tasks such as troubleshooting, remote access and network security. In this article, PHP editor Xinyi will introduce you to the method of Lenovo computer IP query in detail, including using the command prompt and network settings. Read on to learn how to easily obtain the IP address of your Lenovo computer so you can better manage your network.
You can follow the steps below:
1. Open the "Control Panel" by pressing the Windows key, enter "Control Panel" and open it.
2. In the "Control Panel", find the "Network and Sharing Center" and click to enter.
3. Then, click on the network type like "Ethernet" or "Wi-Fi" to open the network connection.
4. In the new window, click the "Details" button. This will open a window with detailed information about your Lenovo computer's network connection.
5. In this window, you can view the IP address and other network information of the Lenovo computer.
Note that it will be slightly different depending on the operating system version, but the basic steps are the same. In addition, if you are using a router, you can log in to the router management page to query. Different router brands and models have slightly different operations. Please refer to the corresponding manual or official guide for details.
The detailed address cannot be queried directly. Because the IP address refers to the Internet Protocol address, it identifies the network location of a computer rather than its specific physical location. If you want to query the detailed address of the computer, you need to combine it with other information such as geographical location, network service provider, etc. for analysis and processing. However, there are also certain privacy risks that need to be handled carefully. Content extension: In real life, if you need to query the source of network attacks, geolocation tracking, etc., you usually need to use some professional technical means, such as phishing traps, reverse DNS queries, network geolocation services, etc. However, these methods also need to be used legally and in compliance with relevant laws, regulations and ethical standards.
Here is the simplest command query method. You can easily query the results by following the steps below.
1. View IP in Windows system
In Windows system, most people use the graphical method to view the IP address. The method is: first open it in sequence, then double-click the corresponding network card icon, and click "Details" in the pop-up network card window. ” to view the IP address.
In addition to this graphical method, Windows also has a simpler and faster command line method. The method is: press win+R keys and enter "cmd" in the pop-up run window. Then enter "ipconfig -all" in the cmd window to view the IP addresses of all network cards.
2. Check IP in Linux system
Because Linux is generally used in server systems, the command line method is basically used. Therefore, few people will use the Linux system for desktop computers, unless they are people who know a little bit about technology. People who know technology generally know how to query IP. The method is: enter "ifconfig" on the command line.
Summary
The most intuitive way to query IP on a computer is to view it graphically, and the easiest way is to view it through the command line. The command for Windows system is "ipconfig -all", and the command for Linux system is "ifconfig".
The method to query the IP address of the computer is as follows
Method 1
1. Click on the desktop and select on the interface that appears.
2. Enter "cmd" in
3. Open, enter ipconfig/all again, your computer IP address will be displayed on the dos interface
Method 2:
1. Open and view,
2. Open, select. Select on the interface that appears.
3. The interface after opening will display your computer IP address
Method:
(1) Find the Network Neighborhood or network on the computer desktop;
(2) Right-click the network and select Properties;
(3) Open the Network Sharing Center and click on the connected network;
( 4) The network connection status bar pops up, click on the detailed information inside;
(5) In the detailed list, we can see the detailed IP configuration information of the network.
We sometimes encounter some special situations in work and life that require us to check the IP address of the computer. Some students may not be familiar with this operation. Here are two simple methods for finding the local IP address.
Method 1: cmd-ipconfig command search
Open the run window through the win+r key combination, enter cmd and click OK or press Enter to open; enter the ipconfig command and press Enter to run, we can see the IPV6 address, IPV4 address, subnet mask, default gateway; the computer IP address we need is the IPv4 address, usually starting with 172. or 192.168.
Method 2: Check the network connection
win10系統點擊右下方的網絡連接圖標，會彈出設置-以太網窗口，點擊網絡，在彈出的網絡窗口中我們就可以禪道我們的IPv4地址啦。
以上就是兩種查看電腦IP位址的方法了。可能有同學要問了，為什麼我透過這兩種方法查到的IP位址和我百度搜IP查到的位址不一樣呢?
這裡簡單說一下，透過上述兩種方法查詢到的IP位址不一樣呢?
這裡簡單說一下，透過上述兩種方法查詢到的IP位址是區域網路IP也就是本機IP位址，而透過百度查詢IP取得的位址是公用IP位址。百度查到的IP位址，通常是給一個的單位或一個區域的，我們稱這樣的ip位址為公有IP位址，公有ip位址可以跟其它網路傳輸訊息，也就是說這樣的IP位址才能上網。
我們實際能夠接觸的ip位址，也就是ipconfig看到的，一般是私有ip位址，是區域網路內部的位址，是不能直接與外部交換資訊的，當我們需要連網時，我們需要路由器轉接，取得公網IP，這樣我們就可以連接網路了。
品易HTTP-免費IP資源-千萬動態HTTP#品易http#
國內優質資料擷取服務商
日更400萬純淨IP資源
七、電腦ip位址查詢方法是什麼?
方法①從網路和共享中心進入查看IP位址（以Win 10系統為例）
用滑鼠右鍵10的“開始”按鈕→選擇“網路連線”打開。用滑鼠右鍵「本機連線」→選擇「狀態」開啟。點擊“詳細資料”。找到頁面中的“IPv4 位址”，就是我們電腦目前的ip位址;方法②透過命令查看IP位址
訪問搜尋列並鍵入“ cmd”開啟命令提示字元。將出現一個黑色窗口，鍵入“ ipconfig”然後回車，顯示的IPv4位址就是你的目前IP位址。
八、怎麼查詢電腦ip位址？
這裡介紹一個最簡單的命令查詢方法，按照以下步驟即可輕鬆查詢到結果。
1、windows系統查看IP
在windows系統中，大部分人使用圖形方式查看IP地址，方法是：首先依次打開，然後雙擊對應的網卡圖標，並在彈出的網卡窗口中點擊“詳細信息”即可查看到IP位址。
除了這個圖形化的方法，windows也有更簡單快速的命令列方式。方法是：按win+R鍵，並在彈出的運行視窗中輸入「cmd」。然後在cmd視窗中輸入“ipconfig -all”，即可查看到所有網路卡的IP位址。
2、linux系統查看IP
因為linux一般用於伺服器系統，基本採用命令列方式。所以桌上電腦很少人會採用linux系統，除非懂點技術的人。懂技術的人一般都知道查詢IP的方法。方法就是：在命令列下輸入「ifconfig」即可。
總結
九、電腦如何查詢本機IP？
要查詢本機IP，可以開啟命令提示字元或終端機窗口，輸入「ipconfig」指令（Windows系統）或「ifconfig」指令（Mac或Linux系統），回車後會顯示本機的IP位址、子網路遮罩、預設閘道等資訊。
也可以在網路設定中查看本機的IP位址。
在Windows系統中，可以在“控制台”中找到“網路和共享中心”，點擊“本地連接”或“無線網路連接”後，選擇“詳細資料”即可查看IP位址。
十、電腦終端ip位址查詢？
可以使用命令列工具進行查詢。在windows作業系統中，開啟命令提示字元視窗（按win + r 鍵，輸入cmd 並回車），輸入ipconfig 指令，查看本機的ipv4 位址；
在mac os中，開啟終端機視窗（按command +空白鍵，輸入terminal 並回車），輸入ifconfig 指令，查看本機的ipv4 位址。The above is the detailed content of Lenovo computer IP query?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
