The choice of laptop memory is crucial and directly affects computer performance. How to check which memory module is suitable for a laptop? PHP editor Youzi brings you a detailed guide, from identifying notebook memory types to selecting compatible memory modules, to solve your confusion step by step. Continue reading this article to learn how to easily see which memory modules are suitable for your laptop to improve your computer's performance.
1. First confirm the specific model of the laptop (take ASUS laptop as an example);
2. Go to the ASUS official website, click ①[Search], enter ②[Computer Model], and click the Enter key on the keyboard.
3. Click [Product Specifications].
4. Take the following picture as an example:
Check the memory related items and confirm that it supports DDR4 2400MHz, 1 memory slot, and supports up to 8GB.
There is also 4GB of Onboard memory (onboard memory), and the Onboard memory cannot be replaced.
You can also check the supported hard drive specifications in the storage function item.
(Please note: If expansion is necessary, please contact the local ASUS authorized repair center for consultation. If you want to inquire about the list of compatible brands/manufacturers, please contact online customer service.)
To replace the memory module of your laptop, you first need to confirm the model and specifications of the current memory module, and then select a new memory module based on the maximum memory capacity and type supported by the motherboard. Generally speaking, DDR3 and DDR4 are the memory modules commonly used in current notebooks, so when purchasing, you need to ensure that the memory module you choose is compatible with the motherboard.
Tools required to replace the memory module: a Phillips screwdriver, a razor and a smaller container to store the removed screws. Make sure to operate in a well-ventilated environment, and make sure the laptop is turned off and the charger is disconnected before replacing the memory module.
After confirming the suitable memory module, you first need to open the back cover of the laptop. Usually, use a Phillips screwdriver to unscrew the fixing screws, and then gently push the cover open without force. Use excessive force to avoid damaging the cover or its components.
Find the memory module slot and pay attention to the fixing clips on both sides of the slot. After loosening the fixing clips, insert the memory module into the slot at an angle, making sure that the gold finger is in good contact with the slot, and then use the appropriate Press the memory module firmly until the retaining clips automatically snap into place on both sides of the memory module.
After successfully replacing the memory module, reinstall the back cover and secure the screws with a screwdriver, then restart the laptop and check whether the new memory module is successfully recognized.
With the correct steps, you can successfully replace the memory module of your laptop and improve your laptop's running speed and multitasking capabilities.
Laptop startup failure is a common problem that may be encountered when using a computer. This kind of failure will cause trouble and inconvenience to users. If you encounter a laptop startup failure, don't panic. This article will introduce you to the possible causes of computer startup failure and the corresponding solutions. I hope it will be helpful to you.
The laptop cannot be powered on may be due to a variety of reasons. Here are some possible reasons:
Power supply problem: The computer may not be powered on due to a power problem. You can check the power socket, Is the power adapter normal? Hardware failure: Hardware failure is a common reason why the computer cannot be turned on. It may be a failure of the memory module, hard disk, motherboard and other hardware. Operating system problems: A fault in the operating system can also cause the computer to fail to boot normally. This may be caused by corrupted system files or a crashed operating system. Incorrect BIOS settings: If the BIOS settings are incorrect, it may also cause the computer to fail to boot. Software conflicts: Improper installation of some software or conflicts between software can also cause the computer to fail to boot.If your laptop cannot be turned on normally, you can try the following methods to solve the problem:
Check the power supply: First make sure the power socket is normal, the power adapter is connected correctly, the battery is charged, and the power light is on. Troubleshoot hardware faults: You can try unplugging memory modules, hard disks and other hardware, and then reinserting them to see if the problem can be solved. Restore the system: If the boot failure is caused by an operating system problem, you can try to use the system recovery function or reinstall the system. Reset BIOS: You can try to reset BIOS settings and restore BIOS settings to their default state. Uninstall the software: If the conflict is caused by software, you can try to uninstall the recently installed software or operate in safe mode.In general, laptop boot failure is a common but solvable problem. Users do not need to panic when the computer cannot boot normally. They can gradually investigate possible causes and take corresponding solutions. Solve the problem. I hope that the above introduction will be helpful to you when you encounter a laptop startup failure, and I wish your computer can successfully return to normal use. thanks for reading!
The above is the detailed content of How to check which memory module is suitable for a laptop?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
