What is the difference between a router and a cat?

Can. However, you need to pay attention to some issues: 1. Placing the router upside down may have a certain impact on heat dissipation, causing heat to accumulate at the bottom of the router, affecting the heat dissipation effect. Long-term overheating may reduce the performance of the router and adversely affect its lifespan. ; 2. Placing the router upside down may affect the operation and management of the device, and the indicator lights and interfaces may be blocked or inconvenient to operate; 3. Placing the router upside down may also have a certain impact on network security, and the default user name and password may cause This information is more susceptible to prying eyes.

The impact of turning off dhcp on the router: 1. The client cannot automatically obtain an IP address; 2. The IP address needs to be configured manually; 3. It may cause network connection problems; 4. It affects the communication of network devices; 5. IP address conflicts; 6. Unable to proceed Dynamic address allocation; 7. Network isolation cannot be performed; 8. Traffic control cannot be performed; 9. Access control cannot be performed. It is recommended that before turning off the DHCP service, carefully consider whether it really needs to be turned off, or keep the DHCP service to ensure that the client can automatically obtain the correct IP address.

The first light is on, indicating that the router is powered on. Which port is plugged in, the light of which port is on, and flashing means data is being transmitted. Wireless routers usually have three indicator lights: SYS, LAN and WAN. When the wireless router is powered on, the SYS light will light up. When the wireless router is connected to the network modem, the WAN light will light up. The LAN light corresponds to each interface of the wireless router. As long as the network cable is inserted into the corresponding interface, the corresponding LAN light will light up. 1. If it keeps flashing, it means it is transmitted by data, and the router settings should be normal. 2. If you have always been able to access the Internet, but you can't get online recently; it is probably a problem with the external line, that is, a problem with the operator (usually there is a problem with the line, causing the data signal to attenuate too much, although the line is good)

Students who know computers all know that if our computer wants to connect to the network, it must have an IP address. This IP address can be manually configured, such as 172.16.19.20; it can also be automatically obtained by the DHCP server of the computer network card, such as 192.168.1.100 etc. These IP addresses are what we often call IPV4 addresses, and the corresponding IPV6 is also a type of IP address. What is IPV6 IPV6 is a new IP address that emerged in response to the exhaustion of IPV4 address resources. Its full name is "Internet Protocol Version 6", and its Chinese name is the sixth generation of Internet Protocol. The number of IPv6 addresses is theoretically 2^128

How to connect the optical modem to the wireless router: 1. Connect the LAN port of the optical modem to the WLAN port of the router; 2. Use a toothpick or needle to poke the reset button of the router; 3. There is usually a management page on the back of the router, such as The one on the router is tplolgin.cn. Enter this address in the browser. If it does not exist, enter 192.168.1.1. This is the default address of the router. 4. Enter the management page. You will first be asked to set the administrator password. Set it up. You can enter the router settings and so on.

Placing the router upside down may have some effects on the network, including reduced signal coverage, blocked signal transmission, poor temperature and heat dissipation, and reduced network speed. Detailed introduction: 1. The signal coverage is reduced. Routers are usually designed to radiate signals outward in a horizontal direction. Therefore, placing the router upside down may cause the signal coverage to be reduced, which may cause signal in some areas. Weakening, thus affecting the stability and speed of the connection; 2. Signal transmission is blocked. Placing the router upside down may cause signal transmission to be blocked, etc.

The flashing pon light on the optical modem means that the optical modem is trying to establish a network connection. The PON light is a registration indicator light used to indicate whether the optical modem has successfully registered and established a connection. When the PON light flashes, it means that the optical modem is trying to establish a connection. This is usually because the line or equipment is faulty, causing the optical modem to be unable to establish a connection with the gateway. You need to check whether the indoor line connection is correct and whether there is any bending angle that is too large. wiring, and whether there are any loose connectors. If the line connection is normal, you can try to restart the optical modem and gateway to restore the network connection.

In modern life, smart home interconnection has become a mainstream. Many users use smart devices to interconnect with their mobile phones at home to achieve easy control settings to facilitate their life experience. So when using the Mijia app, many users You may not know exactly how to add your own router. This tutorial guide will provide you with a detailed introduction. I hope it can help everyone in need. 1. Turn on the WIFI of the mobile phone, click on the wireless wifi name of the router, connect to the wireless network of the router, and then connect. On the Mijia homepage, click the "Nearby Devices" option on the left, and then slide to the nearby devices page. You will see the router icon of the local device. 3. Click "Router" and "Enter